studio diary 20170705

well somehow time has really gotten away from me, and I’ve not managed to write a blog for a couple of months now.  I have an excuse (of course):  I’ve been busy.  Mainly, working on the new pedalboards and guitar system (more on that shortly) but also, still trying to “keep my hand in” by working on music in the form of a very, very large collection of new tunes created in Garage Band.  I would venture to say that over the past few months, GB became a bit of an obsession, to the point where my iPhone overfloweth with Garage Band songs and drafts, sometimes, just one or two versions, sometimes, six or seven if a particular song needs a lot of detailed work.

the net result of that, is that actually, both my phone and my favourite tablet, are currently overflowing, and later today, I will be offloading completed tracks, and also, completing incomplete tracks and then offloading them, and then, making sure I have final mixes of all unpublished tracks…so that finally, I can master them and upload them. Normally, this would be a handful of tracks, but if I am not mistaken (and this number might not be exact) at the moment, I have no less than 16 NEW Garage Band tracks to sort out and add to my Garage Band Eternal Album on Bandcamp.

Sixteen new tracks!  Now – I have been working pretty exclusively in Garage Band over the past several months, and not working so much with real instruments, etc. in the studio – and that is because when I have had time to work in the studio – I have had to dedicate that to working on the guitar system and pedal boards (plural).  Those have now grown to four in total, and in fact, just yesterday, I worked out a brilliant new system, for accessing the different sounds – I am using a very simple device, a “pan pedal” which is made by Ernie Ball, to allow me to “move” between my main studio set up (which currently is comprised of two pedalboards, which I call “Pedalboard 1” and “Pedalboard 2” (imaginative names, I know) and a third board, which, surprisingly, is named “Pedalboard 3”.  So I can be playing one sound via PB1/PB2 (which are currently chained together) and then I can “switch” over to take a solo on PB3 where a completely different sound is waiting patiently for me.

Having the pan pedal, also means I can “blend” the two sounds – and hearing that, you can get some amazing “stacked” guitar tones – because for the first time, I am actually running two complete stereo set-ups, through two separate guitar systems – and, I have the output of PB1/PB2 going to the board direct, while the output of PB3, is miked with two Shure SM-57 instrument microphones, and those are going direct to the sound card. This then means when I record, I can record two tracks of the direct sound on PB1/PB2 and two tracks of the miked sound of PB3 on two OTHER tracks which means I will then be free to mix and match however I want – using as much (or as little) of each of the two completely different-sounding stereo feeds.

I haven’t yet mentioned the fourth pedalboard – it has an incredibly imaginative name, which you will probably never guess – Pedalboard 4.  But – it does have a distinct sub-title, unlike the other three – it’s the Guitar Synth board.  It’s quite simplistic, but it is a viable very different sound source, and it can be easily chained to PB3 or otherwise incorporated into the mix since it’s also tied directly to the mixer.  So the Guitar Synth library of sounds is also readily available now – directly out of the mixing board.

Also – with just a very quick change of cables – I can re-route the pan pedal to move between PB1/2, and PB4, or, back to PB3, or if I really wanted – I could have it pan between PB1/2 and PB3/4 chained together.  Talk about sounds…that would be a lot of sounds.  Right now, I am pretty happy with my PB1/PB2 combination, panning to the little PB3 board which is great for distorted soloing.

Getting all of that set up and working, and finalised (for the moment, of course, until I change my mind again, or, more likely, until I think of a “better way” to do things) has taken up the last several months’ time, meaning that I have not had time to work with real instruments in the real studio, except to test sounds and boards – and I’ve been doing a lot of that.  I have successfully re-programmed my Ground Control MIDI controller with 200 awesome sound combinations, and successfully done a sysex backup of that new set of sounds.  So that challenge was finally sorted out after quite a bit of trouble…I have, however, finally cracked MIDI Sysex – which for a long time, was a mystery to me – no more, now, I know how to backup, and restore, the entire contents of my Ground Control…it’s fairly easy to do, if you are patient.

I do have one other aspiration, which I actually got this idea from Vernon Reid (a great source of guitar ideas – he has helped Eventide with a lot of their distortion algorithms – so I offer up my thanks to Vernon wherever he is!), which is to stop doing ALL of my effects in series, and do them in parallel (to be honest, I also remember the late, great Allan Holdsworth, describing the same idea in a guitar workshop) – running effects in parallel.  Vernon has discovered a nice little DOD Resistance Mixer (the model AC-240, to be exact) which allows you to run four in to one out, and he uses a few of these in his live set-up (which I saw on YouTube, of course!).  It’s brilliant, and I do plan to look into that when time permits.  For the moment, out of necessity more than choice, I am doing it “old school” – in series.  Given that I am running a lot of hardware in series, it actually is all sounding very, very good now.

Note:  later on this year, we are going to see Living Colour play live in a Glasgow venue, so I can’t wait for that – one of my guitar heroes – Vernon Reid, I will finally get to see and hear Vernon play – I can’t wait!  A great and greatly under-appreciated band, Living Colour.  One of my personal favourites…it”s going to be amazing. I am very excited about this concert!!

Anyway – based on the work I’ve been doing, I have decided that once I finished processing the outstanding 15 or 16 Garage Band tracks (which I plan to begin work on this afternoon) that I will no longer spend as much time working in Garage Band, or, if I do, it will be probably for ambient projects, rather than my endless exploration of Apple Loops mixed with “real” content i.e. bass parts “played” by myself, and instead, go back to working on real music with real instruments – primarily, the electric guitar.

I think that my obsession with Garage Band has finally run its course, but, the result of it is an already very interesting catalogue of music, but, once I mix and master the next 16 tracks of completed Garage Band music – it will become apparent what a brilliant tool it has become for music creation.  It is pretty amazing what you can do with it, and I’ve been working more with matching tracks up pitch-wise and timing wise, so, matching a “real” bass part to an Apple loop, for example, or pitching different tracks to fit better with other tracks.

It’s amazing how well it all works, and, I have had an absolute blast creatively, it is endlessly fascinating to me what you can do with a stack of pre-made loops and a little bit of crafty bass playing.  I’ve found that to be key in most of the compositions I have worked on – I might create an entire piece out of Apple loops, but then, to humanise it, I play a “real” bass part – and that does it, that suddenly makes the track “pop” – it’s weird.

For a while, another technique I would use, would be to have the first two thirds of each piece, be entirely artificial; all made from loops, and then suddenly, during the last third or quarter of the piece, bring in a “real bass” part and the effect is really dramatic – it really makes the tracks sound so much better, even if there is already a synth bass or whatever – having that wonderful, plain, “Paul McCartney” bass there makes the tracks irresistible.

I have spent a ridiculous amount of time perfecting some of those bass parts – which are often played on the fly in one take, and then close-edited later to sharpen them up – taking a wild, on-the-fly live performance, and custom-fitting it to the existing song.  It’s a lot of work – but it’s so, so worth it, because it just brings the pieces full circle, and the artificiality that the loops create, gets seriously negated by the humanness of the Paul McCartney plays as “played” by yours truly.

So when you finally get to hear the next 16 Garage Band uploads from me – please listen especially to the bass guitars – because I have indeed, worked really hard on those bass parts – which you will find in most all (but not all) of my Garage Band work.

I should also mention the other “star” of the Garage Band tracks, which is the Korg IWorkstation synthesizer, with it’s two dozen different sets of presets – if you search long enough, you can always find the perfect sound, and since Garage Band’s Inter-App Audio is so well implemented, it’s easy to bring in a powerful synth like the “iWavestation”, and I use it extensively, on multiple tracks, on almost all of my Garage Band material.  So those are my two secret weapons, really:

  1. Apple’s “Paul McCartney” bass, in “Note” mode, which I play like a real bass, then close edit later to “perfect” the bass part
  2. Via Inter-App Audio, I call up the “Korg iWavestation” synthesizer which can provide an absolutely astonishing universe of sounds from any kind of synth sound; any kind of beautiful, spacious pad sound, to drums, basses, whistles, you name it, it’s in there – one of Korg‘s most amazing products, ever.  It has become my “go-to” synth whenever I am recording in an app that offers IIA connectivity – the first thing I do, is bring in an instance or ten or the iWavestation – I cannot recommend it highly enough, it’s a great synth and workstation, too – absolutely amazing and sounds great.

The third and uncredited star, is of course, those amazing Apple Loops – without them, none of this amazing catalogue of work would exist, and I can’t believe how this incredibly diverse set of music, where every piece is completely different, where each time, I try to find a new approach, a new sound, to make it utterly unique, and, importantly, different from the last piece I did – and if you are doing this across dozens of tracks, you end up with a diversity of music that is almost indefinable – I could literally, not describe the different genres, types, feelings, grooves, systems, concepts – I just can’t, the only way to describe it is to say, go to the Garage Band Eternal Album, and listen to it from start to finish – and then try to describe in words what you just heard.

And when I add in the next 16, which feature some of the most diverse and weirdest, most out-there compositions so far – that will make the above experiment even more interesting.  If I were to continue with this, the madness of being addicted to Garage Band might send me right over the edge – I don’t know.

I am going to take a break, I am extremely happy with both the catalogue “so far” (note, as of this point in time, 20170705, the Garage Band Eternal Album contains 24 unique tracks) or to date, as well as, I am very excited about the next 16 tracks – which will close out the catalogue in the short term (bringing the total number of tracks to about 40 – which in itself, is amazing), because I am (with some difficulty, I admit) going to slow down or stop producing so very much Garage Band material, and return to working on real songs with real guitars and keyboards, and I am going to give the amazing, easy to use, fun to use, Garage Band – a well-earned rest.  Because if I am honest, I have spent altogether too much time working on Garage Band songs, and not giving my other musical outlets a chance!  Of course – that wasn’t intentional, they weren’t ready – but, now they ARE ready – so – I am ready.

 

It’s also my hope, to return to making ambient music, and in particular, ambient music made with applications.  I still have unexplored areas that utilise ambient tools that I have had for many years, as well as some newer apps that I also have not spent enough time with – so I hope to rectify that situation, and in the process, hopefully, add some new ambient tracks to some of the catalogues / eternal albums up there on Bandcamp.

 

I am hoping I have reached, or nearly reached, the “cut-off” point, where the total obsession with Garage Band ends, and a new practice of music-making begins, which involves using real guitars and my new pedalboards and guitar systems plural.  That is the idea, anyway – and that is why I have also spent the last several months trying to get everything ready for this day – and after extensive testing, and spending a lot of time creating 200 amazing and beautiful guitar sounds in my Ground Control Pro MIDI Controller – finally, everything is ready, and I have now, at my fingertips, a huge and diverse array of guitar sounds that I can use in my new compositions!  It was a lot of work to get to this point, and I am beyond pleased with the way my guitar is sounding – and that is not something I’ve said very often in my life.

Of course, Komplete will still be there to play it’s part, since I don’t have the space for a physical drum kit, and, I’ve never had the opportunity / chance / space / time to learn how to play a real drum kit – I still depend on Komplete to help me set up my real guitars-based tracks – mostly, with the drum tracks.  I also, often, will use Komplete to do basses – and certainly, I use it for keyboards and synths, along with other softwares like the M-Tron Pro mellotron software.

When the urge takes me, I do sometimes play real bass instead of Komplete’s bass, but using Komplete is truly tempting because it does contain toolsets like Scarbee’s amazing Rickenbacker bass samples, and I just can’t resist having the sound of a Rickenbacker or a Fender Jazz bass or a Fender Precision on my tracks – I love those basses, and being able to “Play” them, even via a MIDI keyboard – is heaven.  My cheap throwaway bass cannot compete with those sampled basses for tone – it was so cheap, that I actually paid nothing for it – a good friend of mine, and an amazing musician, too, Michael Dawson, actually gifted that bass to me – which I have subsequently used on certain tracks, one of which was the tribute to the late John Wetton – “Wettonizer” is the one main track I remember using the “free” Washburn bass on.  It is actually, a lot of fun to play (it’s tiny, and I am not!), so maybe I will add in some “real basses” as well as using the amazing Rickenbacker and Fender samples available via Scarbee via Komplete.

In essence, in the studio, Komplete is my “band” – they come up with the bass and drum tracks, and if needed, keyboard and synth tracks – and then, I am left to play real guitars on top of those created tracks.  It’s as close as I can get to having a real band to play with at the moment – and again, I don’t have the space available for a real band anyway, so at the moment, the Komplete “band” does me more than proud – and you can hear exactly how well they do, by listening to a couple of my larger works, where they are heavily featured – in particular, on “the complete unknown” “planet obelisk” and “day seventeen” – these are examples of the full Komplete band – drums, bass, keyboards – supporting me, the man of many guitar parts :-).  It takes weeks or months to get the drums, basses and keys in place on tracks like these, and it’s not uncommon that three months might pass, before I get to play a single note on the guitar.

(Note: all of the tracks noted above, are all taken from the dave stafford “progressive rock” eternal album – please have a listen on Bandcamp).

 

Of course, it does take time, creating drum tracks, and bass tracks, and keyboards and synths – but it’s worth the time, because I want the best possible backdrop for guitars – and with Komplete, I get the best there is.  For example, depending on what kind of era I want to emulate, I tend to use the Abbey Road drum kits, and I can choose from a vintage 50s kit, a 1960s kit, a 70s kit, 80s, kit or “modern” kit – and each one has it’s own character and options, and they sound absolutely amazing – so I tend to mostly use those, although there are many, many other drum options within Komplete…Abbey Road drums are my current favourite, and they can be heard on a lot of my works.

I have also favoured the Scarbee Rickenbacker bass, using different pickups and presets, for a lot of my pieces, and I think Scarbee is an absolutely amazing company, the care with which they create their instruments is exquisite – the details are absolutely stunning.  I can get so many amazing tones out of that Rickenbacker bass, I could just about not ever use any other – except of course, when I do need a Fender bass for a deeper, more traditional sound – and then, I turn to Scarbee once again – and in many cases, they even offer an “amped” version – so you can have just the bass, or, the bass sampled through amps – it’s amazing – I am totally spoiled for choice.

After a lot of hard work, especially the programming of 200 custom preset guitar “sounds” on the Ground Control Pro, I am ready to play some serious guitar – but, serious guitar with the best tones possible.  I have really chosen a bit of a strange path, over the years, I have mostly stayed away from “guitar amps”, instead, using a plain power amp, and asking either software, or, my pedalboards, to be the main source of “tone”.  Now I am in a hybrid set up – I am using an amp, or actually, two amps – one is a solid state guitar amp, which has a line out to the mixer, and the other is my plain power amp, where I am miking my two 1X12 guitar cabs direct to the sound card.  The “tone”, however, is the tone of whatever guitar I am playing, plus, what sound colourations are available from the pedalboards – which of course, include the many-faceted Eventide H9s – each of which contains a massive library of absolutely astonishing, high-quality sounds.

When I think about what is possible with just the H9s (ignoring all other pedals for the moment) I kinda wish I had more than 200 slots in my MIDI pedal, but the truth is, by combining different H9 algorithms, the number of possible insanely good guitar sounds, is not just 200, or even 2000, it’s probably more like 200,000.  Seriously – and, Eventide keeps adding in new algorithms, too, which just increases, exponentially, the possibilities, to basically, limitless – the latest new algorithm, “Pitchfuzz”, contains some amazing new distorted and / or pitch-shifted sounds, which are out of this world, and, of course, I have incorporated the best of those into my 200 presets.  Using the H9s in multiples, makes it possible to create combinations of effects that are truly lush and incredible sounding – you have to hear them to believe them.  Exquisite combinations of beautiful, individual sounds…

I did spend a bit of extra time on one particular sound that I truly love, and I got this idea straight from Allan Holdsworth (may he rest in peace) – on the first of several occasions where I was privileged to see Allan play guitar, he had this amazing “swell” sound, where while the bass and drums played a kind of “drone”, he would “fade in” or “swell” these beautiful, clean chords, which were drenched in layers of delay and reverb – and I never forgot how beautiful that sounded live.

During the Bindlestiff years, I even tried to emulate that sound, by fading the sound in manually with a volume pedal, into a huge reverb “room” – close, but not quite.  But now – in the land of H9s – I can have auto-swell, at any time setting I want, and it’s brilliant.

I took this opportunity to create some special Dave Stafford auto-swell settings; starting with a short auto-swell (1900 milliseconds), then, medium (3100 ms) and finally, the “Allan Holdsworth” series of auto-swell (my “long” swell at 4000 ms or 4 seconds) – and I made several variations of that basic sound, running the swell through various different Eventide Space reverb sounds, and in one final example, through a beautiful Eventide delay and then into a beautiful Eventide Space sound.  The result is a mini-bank of amazing “swell” variations, and I am so glad I took the time to work out the programming for those sounds – taking care of details like that, gives me an edge, it gives me something unusual, not stock – but with my own personality – these 200 sounds are Dave Stafford Guitar Sounds, regardless of whether they are “stock” or “custom” – they are my choices and juxtapositions – and it’s so nice to have such an amazing library of “algorithm meets algorithm” possibilities.

This afternoon, then, will be dedicated to downloading (and, clearing off, thank god) the 16 new Garage Band pieces, trying to first get the final mixes just right, then, the mastering, and finally, probably starting in a few days’ time, uploading them – and once uploaded, the Garage Band Eternal Album will have reached about 40 unique Dave Stafford compositions done over a relatively short period of time – months – but, in terms of sound, and quality – it’s a huge, huge sound – and, a catalogue of which I am both very proud and very fond of – I have really enjoyed my “time of Garage Band”.

You should try it – drop everything else for a while, and just create with Garage Band – a piece every couple of days was usually my method, although some of the more complex pieces might then stretch out to a week or two until I was happy with the final version – and then, immediately, start another one – preferably, something that sounded COMPLETELY different to the piece just completed.

In a week or two at most, you will be able to hear all 40 tracks, and these should give you a good glimpse (at least) – if not an amazing view – of what this creative and innovative Apple tool – one of the oldest “computer-based” music making tools (now, mobilised on the iPhone and iPad, of course – in the Apple way) can do; and, with it’s latest updates, it has become one of the most fertile, stable, and unique grounds for growing musical ideas.

Anyone can have a go – drag some Apple loops into your song, and you are away – dream up any kind of music you like.  Just do loops if you don’t want to play, or don’t know how – you can still create, using the magical Apple loops, if you do play an instrument, then you have the opportunity to add in some keyboard based or drum or bass content of your own.  It’s easy to learn, and endlessly expandable, you can add many, many bars and create very long pieces, or create three minute pop masterpieces – it’s all there with Garage Band.

 

And now – to mix, download, master and start getting those new tracks uploaded – I can’t wait !!!

 

 

peace and love

 

dave 🙂

 

 

 

 

 

 

 

 

 

 

Advertisement

From Gong’s Guitarist to Blu-Ray Music Extraction Processes to the NewestOld ios Application for IDevices…

I am becoming acquainted with the first five albums by Steve Hillage, beginning with his band “Uriel” and their album “Arzachel” in 1969 and moving up to 1976’s BBC Radio 1 In Concert – which is playing now in my headphones – the announcer letting us know that only 8 percent of BBC listeners are currently listening in stereo – and they’d like to get that number up as soon as possible!

On almost a whim, I decided that if I was ever going to get caught up on what I had missed in the solo canon of Steve Hillage, outside of his work in Gong, with which I am very familiar, would be to shell out for the remarkable new 22 disc box set, “Searching For The Spark”.  It arrived a few weeks ago, I then spent a few days ripping discs, and I’ve since spent a very, very enjoyable morning indeed, listening to all five of the discs currently on my IPod – and – Hillage is a remarkable person – and, along with his life partner Miquette, he fronts a band with ever-growing confidence – especially when we get to “that” guitar solo.

I was quite amazed at the jump in guitar playing quality between the first two albums that feature Hillage, the above mentioned Arzachel from 1969, and then, 1972 brought us “Khan” with their album “Sea Shanty” – and in the three years that had passed, Hillage’s guitar prowess had increased by a significant amount – but nothing like what was about to come – in the form of his first two solo records, the first that bore the name “Steve Hillage” – “Fish Rising”, followed by what is probably his best-known work (and, produced with Todd Rundgren, using Todd’s new Utopia – Roger Powell, Kasim Sulton, and Willie Wilcox – as Hillage’s backing band on the record) “L” – these two releases are where you can really hear the confidence and power of his playing – and I would heartily recommend them to anyone!

I did own a cassette with “L” on it, years ago, so I was familiar with that one album, but never had a chance – until today – to hear Fish Rising, the two early albums, and the first of many, many live CDs that are in the box – this wonderful BBC Radio 1 In Concert 1976 that is playing – in glorious stereo, I might add (after a lovely across the kit drum roll – which just went across my brain in lovely carefully-drum-miked stereo).

I think I will leave the task of a full review to someone who knows more about this, for me, this was just a “way in”, a way to hear the development of this incredibly talented guitarist – who I was really, really fortunate to see both the Steve Hillage Band and Gong, during a very brief UK tour in 2008 – and he was remarkable in both bands – the perfect musical foil for the late Daevid Allen – and it was a unique opportunity, to first hear Steve and Miquette play solo Hillage material (which was unfortunately at the time, besides the obvious cover of “Hurdy Gurdy Man”, unknown to me) as well as, play as an integral part of Gong – this was a remarkable performance featuring most of the main figures in Gong history, including his long time partner Miquette Giraudy, Hillage and Mike Howlett as well.

So that is my most recent listening, previous to that, however, I’ve been revisiting my catalogue of XTC releases, trying to get caught up with capturing all of the additional music hidden away on the Blu-Ray discs included in each of these amazing “Steven Wilson” re-masters – and I guess I can say that I definitely am collecting Steven Wilson re-masters – starting with the King Crimson re-masters – the ultimate – King Crimson in 5.1 sounds absolutely astonishing – it’s so worth it just for that alone – but, there is always a lot of additional music buried on the DVD or Blu-Ray portion, and I’ve developed a unique way to capture this additional material

In assessing my XTC discs, I now have four Steven Wilson XTC re-masters:  Drums & Wires, Skylarking, Oranges & Lemons, and Nonsuch.  I realised that I had only partially done the work on capturing the extra tracks from three of them, so I set out to “right” this wrong.

I also have the same issue with my Gentle Giant, and Yes “Steven Wilson” re-masters – again, I have ripped the ordinary CDs, which contain some of the additional material – but, the additional music on the Blu-Ray has remained accessible only on the 5.1 system – which I can’t take out with me on my iPods.

So – I have developed a process, which includes templates of blank folders, and a template in SONAR Platinum for capturing the music from the discs.  I was wondering if anyone else uses a similar process to this:

 

ACQUIRE BLU-RAY AUDIO CONTENT WITH HIGHEST QUALITY POSSIBLE:

  • Set up your blank folders using the template, which prepares you to “receive” WAV files of the tracks you are capturing, and then later, converting them into MP3 files for your portable device.
  • Those folders look something like this (after conversion from the dummy template folders):

XTC-1989-1-Oranges&Lemons-Remaster-Expanded-Disc01-SWMix-MP3

XTC-1989-1-Oranges&Lemons-Remaster-Expanded-Disc01-SWMix-WAV   (Note:  These are from the CD, which is just ripped normally – not related to this Blu-Ray process)

 

Sometimes there might be two, or even three, CDs (which of course, are all ripped normally)  in which case, those would eat up the Disc01, 02 and 03 slots, and your Blu-Ray material would then start with “Disc04” rather than “Disc02” – you just have to adjust as necessary depending on the contents of the set.  Then, follows your DVD or Blu-Ray ONLY Content:

 

XTC-1989-1-Oranges&Lemons-Remaster-Expanded-Disc02-OriginalMasterMix-MP3

XTC-1989-1-Oranges&Lemons-Remaster-Expanded-Disc02-OriginalMasterMix-WAV

XTC-1989-1-Oranges&Lemons-Remaster-Expanded-Disc03-AlbumInDemo&WorkTapeForm-MP3

XTC-1989-1-Oranges&Lemons-Remaster-Expanded-Disc03-AlbumInDemo&WorkTapeForm-WAV

XTC-1989-1-Oranges&Lemons-Remaster-Expanded-Disc04-ExtraDemos&WorkTapes-MP3

XTC-1989-1-Oranges&Lemons-Remaster-Expanded-Disc04-ExtraDemos&WorkTapes-WAV

XTC-1989-1-Oranges&Lemons-Remaster-Expanded-Disc05-RehearsalsAtLeedsStudiosLA-MP3

XTC-1989-1-Oranges&Lemons-Remaster-Expanded-Disc05-RehearsalsAtLeedsStudiosLA-WAV

XTC-1989-1-Oranges&Lemons-Remaster-Expanded-Disc06-Videos-Mono-MP3

XTC-1989-1-Oranges&Lemons-Remaster-Expanded-Disc06-Videos-Mono-WAV

XTC-1989-1-Oranges&Lemons-Remaster-Expanded-Disc07-StereoInstrumental-MP3

XTC-1989-1-Oranges&Lemons-Remaster-Expanded-Disc07-StereoInstrumental-WAV

 

These folders are only one arrangement, of course, the folder set I come up with, ultimately, just reflects what music is available to me to extract from the Blu-Ray in question.  The set of folders above, is probably suitable, with possible minor alterations, for any XTC album.  Of course, something like “Drums & Wires” has many, many more folders that this example, because there are several different Rehearsal sections on that disc – hence, many more folders (12 in total I believe, or 24 if you count the WAV versions).

 

For King Crimson or Yes, it would be similar, but perhaps, instead of “Videos-Mono” you would probably get “OriginalVinylUK” and “OriginalVinylUS” and so on – so basically – anything that needs captured, you build a folder for.

  • Then, you take a copy of your SONAR Template session (.cwp file) (or equivalent in whatever DAW you use), which is set up with many, many Audio channels – one of my recent efforts ended up at 98 channels – and these are pre-set to use the special S-PDIF “pure digital” input of my sound card – so the S-PDIF outputs of my Blu-Ray player are fed to a pair of inputs on the Sound Card – and all Blu-Ray recording is done via this “pure digital” route – directly from the disc, to the sound card, to SONAR – where I capture them as 48K 24 bit WAV files – the best I can do. The SONAR CWP should be in the root of your work folder, so you can view it and work with it, AND see the folder set shown above.
  • Arm for recording, a single track, which will have a title such as

XTC-1989-1-Oranges&Lemons-Remaster-Expanded-Disc02-OriginalMasterMix-UNTOUCHEDORIGINAL

  • Put the Blu-Ray into the machine, and queue up the Original Master Mix (the Flat Transfer of the original CD with the original Mix) from the EXTRAS section of the Blu-Ray.
  • Press RECORD on the armed channel in SONAR, and once you see the transport moving, then start the Blu-Ray playing.

 

  • Leave that entire disk worth of music to play, while of course, SONAR is recording it in the highest quality possible – Input = S-PDIF and SONAR = 48K 24 Bit.

 

  • Normally, I do not have to adjust the levels at all – for S-PDIF, they seem to be pre-set, and they always make a clean, but never too “hot” recording – it’s ideal. They just approach 0 db, but never surpass it – so, loud and clean.

 

  • Once the Blu-Ray has ended, and you have your recording of the entire CD captured as a SINGLE large WAV file, you can now move onto the next piece of music, and repeat the above process on the next target disc (in this case, it’s Disc03, “Album In Demo & Work Tape Form”).

 

  • When completed, you then move onto the PROCESSING part of the process, which is probably the most time-consuming and patience-testing.

 

PROCESSING THE FILES:

 

  • In your SONAR .cwp file, you now have a series of large wav files, each one representing a disk full of music. Using the back of the box set or it’s booklet as a guide, I then create a single AUDIO track just below the main, large WAV.  That is set up quite simply, you won’t be recording on it, but you need to set it up so it is playing to Master, and thence out to your headphones or speakers, as you need to monitor this process (I use headphones to be the most precise possible).  Once you are happy with your new empty, Audio track, before we work on any music processing – count the individual tracks that are in this large WAV file, and use TRACK CLONE to make the appropriate number of copies of your new, empty Audio track.  If it’s a 15 track album, then I would create 14 more of these, by adjusting the Count of Clones in the Cloning Window.  Push the button, and SONAR (or your DAW) adds 14 empty audio tracks – and now you have 15 empty spaces for tracks.  Which already have their name template ready for a track number at the end – then, go back – and put in your track number and names:

 

  • Return now to your single large wav track, and before you do anything, take a COPY of it, and PASTE it into your new first audio track – TRACK 01 – which will be labelled something like XTC-1989-1-Oranges&Lemons-Remaster-Expanded-Disc02-01-GardenOfEarthlyDelights-OriginalMasterMix, and first, clean up the lead in – there will be extra space there, so you want to reduce that to a very short lead in, and make sure it starts fairly quickly – usually in under a second, so it starts like a normal CD would – immediately.

 

  • Then, find the end of Track 1. Determine the best spot to SPLIT the tracks, so that Track 1 has a proper ending, and that Track 2 will end up with the SPLIT quite close to its first sound.  Once you are happy with this transition point, go ahead and SPLIT the track (leaving the first long recording UNTOUCHED – as the name implies!) always do your first splitting, on the SECOND one – the COPY!!!

 

  • Once split, REMOVE the large chunk of remaining audio, which contains tracks 2 through 15, and MOVE them into the next track.

 

  • Repeat the split, each time, leaving the remainder (of your large wav file copy, which gets smaller and smaller each time you split and move it down) and moving it into the next track.

 

  • Once done, you need to clean up the end of the final track, just to make sure there are no surprises.

 

  • At this point, you should be done with PROCESSING, and ready for OUTPUT.

 

OUTPUTTING THE FILES:

 

  • Ensure that all tracks except your Track 01, “Garden Of Earthly Delights” are MUTED. This is crucial, if you leave anything with sound on it unmuted except for the ONE TRACK you are outputting, it’s sound WILL MIX with your track – thus, ruining it.

 

  • Select the track with your mouse, then, EXPORT – and point the output to your pre-made WAV folder:

 

OUTPUT FOLDER:      XTC-1989-1-Oranges&Lemons-Remaster-Expanded-Disc02-OriginalMasterMix-WAV

 

  • Once the output has completed, check the folder for the presence of the file, make sure it’s there, and, named to your satisfaction.

 

  • Repeat with each track, making sure that you MUTE the previous track, and unmute the one you are working on (or you get a SILENT output file!) – and that ALL tracks except the one you are currently working on, are always MUTED.

 

  • Once the WAV files have all been output, for each Disc – save and back up the .cwp file, save and back up all Audio files created during the session (your large WAV files).

 

  • At this point, you have the best quality, 48K, 24 bit WAV files of the individual tracks, SPLIT out perfectly in the steps above, ready to now transform into MP3 files so you can load them onto your iPod or other portable device.

 

 

FINAL PROCESSING:

 

  • Using DVDSoft tool “Audio Converter” (or any decent utility that Converts WAV files to high quality MP3 files), set the type to your desired quality (I use “Lame Insane Quality 320 kbps Frauhofen MP3” myself) and point the output to the root folder above your WAV and MP3 folders:

 

OUTPUT FOLDER:      XTC-1989-1-Oranges&Lemons-Remaster-Expanded-WAV&MP3 (or whatever YOUR project folder is called – the idea being, we want the tool to output ALL of the MP3s, from ALL of the WAVs, back into the root of your Project, so you can then assign their internal names BEFORE they are finally split up, by you dragging them into their individual, pre-made “MP3” folders.

 

  • Once your type and target folder are set in the Audio Converter tool, you can now drag the files you want to have converted, into the area at the top of the application where it says “DRAG AUDIO FILES HERE” or similar.

 

  • Open your XTC-1989-1-Oranges&Lemons-Remaster-Expanded-Disc02-OriginalMasterMix-WAV folder, and select all 15 / however many you have of your WAV files with your mouse by using SHIFT-mouse, and then DRAG them across into the top part of the DVDSoft Audio Converter Application. I usually just do all of the WAV files as one giant conversion, so after I drag over the Disc02-OriginalMasterMix files, I then carry on, opening each WAV file folder next would be Disc03, then 04, etc., and dragging their contents into the DVDSoft Audio Conversion tool.

 

  • Once you have the entire set of WAV files in place in the Audio Converter, re-check that your output type is correct (for me, that’s always highest quality, 320 kbps MP3), and that your target folder is just the root folder you are working in – and then press “Convert”. The tool starts working, taking each WAV file, and converting it into an MP3 file.   This can take quite some time, depending on how many hours’ worth of WAV files you have loaded into the tool – be patient, it will eventually tell you that the Process Is Complete. NOTE:  When it converts, it adds a “Comment” into each MP3 file – in the field “Comments” it puts its little advert “DVDSoft.com”.

 

  • It’s harmless, but I don’t want it in my file, so the first thing I do, is select all items, while they are all still in the main folder, and I DELETE this “comment”, leaving the Comments field empty as it should be.

 

 

  • While the MP3s are still in the main, root directory of your project, you should go ahead and add in your “Internal File Data” – I start out, by doing a few bulk updates – I select ALL of the MP3s, right click and select “Properties”, select the Details tab, and then, under “Album Artist” and “Contributing Artists”, I add in the band’s name (unless it’s already there). I also do a bulk update on any other fields that are the same for ALL of the files, such as “Genre” IF they are all the same Genre.

 

  • After that, you can highlight each album, or each file, and make whatever adjustments you need to make the INNER NAMES meet your own personal Standards – I have very particular standards, which includes an Album Name that is preceded by a Year and Counter, so, “Oranges & Lemons” is actually called

 

“1989-1 Oranges & Lemons – Remaster – Expanded – Disc 02 – Original Master Mix – The Surround Sound Series” in my collection.

 

…or something like that – by dating these (using this YYYY-Counter template), I can force them to sort into Chronological order, based on the Album title – it works pretty well, but I did start out with that Standard some 9 years ago, so it would take anyone else a long time to institute – but a very good percentage of my existing MP3 collection does contain these dates.  I have even recently, been converting posthumous live CDs back to their performance date, rather than their more current release date – because let’s face it, there were not that many Gentle Giant live shows in 2006 or 2012.  But there are a LOT of shows from 1975, released in the last 30 years – well, I have managed to get them into chronological order with just a few exceptions where no data exists for the date of a concert.  Oh well – it’s the best I could do.

 

  • From here, you would then rename each MP3 folder to match your MP3 collection – to whatever Standard you use there – and then copy them to your individual folders on your drive or drives. I am currently keeping seven copies of the MP3 on seven separate hard drives, and four copies of the WAV masters (because I sweated blood and time extracting these tracks!) on four separate drives – that’s my backup at the moment.   Because I am always short on disc space, I am going to reduce the MP3s down to four soon, to recover a lot of space – but, it was set up as seven and that’s how it was for the longest time…a lot of redundancy!

 

  • Finally, once the MP3s are added to your collection – you can add them to ITunes and sync your device, or, put them on your non-ios device by drag and drop or whatever methodology you use – your MP3 files of rare Blu-Ray content, are NOW FINALLY READY for your listening pleasure – ENJOY!

 

 

So – back to reality – how’s THAT for a Process?  Since I had to do the content of Skylarking and  Oranges & Lemons during the last week or so, I used those experiences to build the Templates and work out exactly how the process should work, getting it down to a science – but not a quick one.  I recently used the new process on XTC “Nonsuch” – and it worked beautifully – it’s much better to have a consistent process for this, because it is pretty complex – as well as three of my four Steven Wilson Yes albums that still need the process done to them.  And one or two of my Steven Wilson Gentle Giant albums.  And ALL of my Steven Wilson Jethro Tull albums…including the brand new Stand Up – The Elevated Edition which sounds awesome, I might add!

 

I’ve got it down from days to hours now, but it can still eat up most of a day, just doing one “album” – because they usually pack a LOT of amazing music onto those Blu-Rays.  It’s quite amazing, to have a 20 disc version of “Drums and Wires” by XTC !!! Lots of choice there…

 

 

The only catalogue that is actually done – is King Crimson – that was my first Steven Wilson remix, the giant DVD release of In The Court of The Crimson King in about 2008 – hard to believe it (my obsession with the quality recordings that are any and all “Steven Wilson Mixes”) goes back that far, six years!

 

The problem is, to do this PROPERLY, takes a huge amount of time.  OK, ripping the music off of the disc, you can just start it and walk away, and do other work while it’s copying the content to that WAV file.  Repeat as necessary.   Sometimes, I just let three or four discs worth play into a HUGE WAV file, then, split it by album, and move them to their appropriate channel.  But once that easy step of transferring the music over is gone – well, then you are back to that horrible processing section, and cutting up different versions of the same album, or, massive quantities of Andy Partridge demos – it is very, very time consuming – and, I am a perfectionist, so if it isn’t perfect – I do it again – but, I am getting better at it…slowly.  It took me two full days to process all of the content on Yes’ “Tales From Topographic Oceans” – 2 whole days!  That seems to be what it takes, although maybe I could do one in a single day under the right circumstances.

 

I do want to get on with the Yes and Gentle Giant in particular, because both of those sport Stereo Instrumentals, which I absolutely love.  I’ve been listening to the Instrumental versions of Yes’ “Tales From Topographic Oceans” and they are fascinating and beautiful – you hear all kinds of things that the vocals hide – and I played “Ritual – Stereo Instrumental” yesterday on the 5.1 system – wow – it sounded fantastic!  Weird without any vocals – but, fascinating, especially hearing what Steve, Rick and in the case of Ritual, Chris are really doing – how it sounded before any vocals arrived – it’s just astonishing.

 

Now that I have finished XTC “Nonsuch”, so that’s all four of my SW XTC Discs  done – and then, eventually, to Yes and Gentle Giant – as for the Steve Hillage CDs that I just ripped – thank GOD it’s just all audio CDs in this set – no DVD or Blu-Ray content – so, that makes it so easy!

 

Until just now, I’ve never written down this process, and now that I see it in black and white, it just seems like going to extraordinary lengths to be able to hear rare music on your portable device – but, I have it streamlined now, so it does go a LOT faster using the templates, and my experience and skill at cutting up tracks, has gotten much, much better lately, so – it’s not quite as bad as it was.  But it is a LONG process by gumbo!

 

OK then, onto pastures new, now that you have learned one way, probably NOT the fastest way (I just know someone will come back to me with a tool that rips all audio from a Blu-ray or DVD with one button push) and it can even split up your tracks for you while cooking you a delicious breakfast – but I don’t know, mine does guarantee consistent, high quality, MP3s, built from the best possible, super high quality WAV file – for the level of technology that I have, it’s not too bad – it could be a lot worse!

 

For me, it’s just for the chance to hear this remarkable music, these musicological gems that Steven Wilson finds on these master tapes, and brings to us all – some amazing music has been unearthed just by his standard processes of “re-mixing” classic prog and pop albums.

 

Speaking of music, well, despite spending SOME time on Blu-Ray content – I have actually also been working on new music – in the studio, I have a new track, which I started a couple of weeks ago, called “On The Cusp Of Yesterday” which I am currently having a titanic struggle with.  The basic track has been done for some time, and, for some weird reason, the last one-minute guitar solo is also done.  So I needed to add guitars, from the beginning to the beginning of this existing solo, which is a bit challenging.

 

I spent an entire day (a few weeks ago on a Sunday, I think) adding some new parts, using a lot of truly beautiful H9 patches, a nice, ordinary clean delay into a hall reverb, not too ostentatious, but just nice – and then some other more strident patches – doing guitar over dubs.  All day, and, I wasn’t happy with the last…two or three overdubs.  Maybe the first one was OK, or maybe it’s just the second one…

 

I was so dissatisfied, because it just had not come out how I heard it in my head, which I didn’t even bother to make a rough mix of it with these new hard-fought overdubs, which were technically ok, but weren’t doing the job for me.

 

So the next time I got some free time to work on it, “On The Cusp Of Yesterday” got a new makeover – I actually decided to go ALL THE WAY BACK to the backing track, hiding all of my previous guitar bits, including the good ones – and I would try again, with that lovely clean delay to start – but this time, a clean delay into a beautiful SpaceTime patch.

 

I did several takes, some involving harmonics, others, strange chords, others, melodies and lead guitar.  Saved everything, but listened to nothing.  Now, I am waiting for another chance to go back and hear what I did – and I know that some certain bits – like the very end – came out REALLY well, there is some viable music there, and possibly, enough to flesh out part of the track, perhaps leaving some spaces for me to populate.

 

At the moment, I am just avoiding it, I am not sure where it’s going, the backing track is exceptional – drums, odd bass, really odd “keyboards” courtesy of “REV”, and a lovely violin.  A good solid track, and I really like it – but, for some inexplicable reason, I am not sure what belongs on top of it.  I am tending towards something quite ambient at the moment, rather than “normal” guitar parts (which is what I did the first time around, where I REALLY didn’t like the outcome) – I am liking ambient guitar parts at the moment, so that might be the way – time will tell.

 

Update: another session, I was able to take the recordings made the second time around, and produce a nice mix of “on the cusp of yesterday” from those – it’s come out really well.  Probably ready to be uploaded…which I still haven’t done, because I still haven’t decided about it…

 

Next – is something a bit unexpected, I am now at this very moment, revealing my plans for my next new “Eternal Album” which has turned out to be something I really did not expect AT ALL:  “Garage Band” !!!!!!!!!!!!!!!!!!!!!!!!!

 

How did that start? I had read somewhere on the Interweb, that Garage Band had had a really good makeover, and was a really cool way to make music now – and I can remember seeing Garage Band years ago on a friends Mac – and I myself have used it, I have a few songs made with it on an old Ipad, that I’ve never published – and possibly won’t, they were very early experiments, before I really had working with Apps down to a Science.

 

I decided to try out this new, improved Garage band, and wow – I was very, very surprised indeed!  It really has a lot of great features, and I think it could become my go-to place for working with samples – and that is what sets it apart, is the “Apple Loops” which are professionally-recorded bits of music, 2 bars of this, 4 bars of that, 8 bars of something really strange.  A lot of grooves, drum grooves, bass grooves, a lot of it is rhythmic in nature, including ethnic sounds from India, Afghanistan and even Egypt – and, a nice batch of African sounds, mostly drums – I have to admit, they have supplied a LOT of great, ready-made content, that you can fit together into tracks in a very easy, intuitive way.

 

I have thoroughly enjoy my Garage Band Renaissance or GBR, and I immediately started producing strange and wonderful hybrid piece of music beginning in mid-September and continuing to the present day.  And I finally did upload the first five complete tracks, to the new album, a few days ago.  I am also nearly finished with a sixth track, working title “preponderance”.  So the Garage Band Renaissance has been a real hit with me – here are the tracks:

 

Start Date            Title                                                       Containing

 

20160919             Hare Rama Buys A Llama               Drum Samples, Manually Played Bass, Grand Piano, Synth, Raucous Rhythm and Lead Guitars, Bizarre Guitar FX, and Bass Samples, Strings Samples

 

20160926             Opposites Attract                            Wonderful Pastiches of African Drum Samples, Ever Changing,

Manually Played Bass, Cello Samples, Afghanistani Melodic Instrument Samples, Sub-Bass Samples, Dub-Step Bass Samples, Bass Synth, Melody Synth, Reversed Melody Synth, Drum Kit Samples, String Section Samples.

 

20160926             Metal Crisis                                        (Altered version of abandoned track “Cuban Crises”) Drum Kit

(Metal) Sample, Metal Chug Rhythm Guitar Sample, Metal

(Metal) Sample, Metal Chug /Blues Lead Guitar Sample, Funky Clean Wah-Wah Guitar Sample, Beautiful Female Voice Singing “Oohs & Aahs” Vocal Sample, Funky Fender Rhodes Electric Piano Sample, Synth Sample, Additional Drum Kit Sample, Manually Played Bass.

 

20161014             Nambutamba Rain Shower         African Drum Samples (Many Different Ones), African Percussion

Samples, Mysterious Electric Piano Riff Sample, Mysterious Guitar Riff Sample, Mysterious Synth Chords, Additional Conga Sample, Rock Bass Guitar Sample, Drum Break Sample, Crash Cymbal Sample (Note: In the end, I actually did not play a single actual note on this, it’s entirely composed of samples – and also, it’s probably the first ever Ambient African piece of music ever made!)

 

20161017             Ten Seventeen (Aka “Nine Nine”)        Drum Kit Samples (Three Different Funked Out Drum Kit Samples, Manually Played Bass Guitar, Sarod Sample, Indian Drum Samples (Khol and Pakawaj Drums), Transport Stop Synth Sample, Voyager 1 Synth Sample, Vocalised Synth Bass Sample, Boogie Right Vox Synth Sample, Vigilante All Sample (String Section & Timpani Samples).

Update: after several more sessions, I FINALLY got the manually played bass guitar part how I wanted it.

 

I am very excited about working with Garage Band again, now that it has had such a brilliant face-lift, and I love how very simple it is to create very intriguing and interesting music, using mainly samples – something I’ve not done much of outside of Komplete – but that’s a very different world of sampling – the Native Instruments world – and I am afraid that Garage Band is not quite up to that standard yet :-).  But – it’s not bad for Apple!

I had a blast recording these tracks, the first where I used an IPhone instead of an Ipad – it’s not bad at all – I found it easy enough to do.  I do like the samples that Apple has provided, and the temptation to just sit and create, is overwhelming – they have a lot of great-sounding samples (and, some terribly bad or terribly cheesy ones, too) which make composing a dream – they even “theme” them together, so for example, you can put a bass guitar, rhythm guitar, and lead guitar “together” and they play back a chunk of an imaginary song by an imaginary band.  Of course, I like to manually force them to match up with the wrong track, cross-breeding them rather than putting them all together as intended – intentionally misusing the pre-matched loops…but that’s just me.

 

 

I have already used that technique twice during the last five weeks of Garage Band work, myself; once on “Hare Rama Buys A Llama” and again on “Metal Crisis” – it works well, and I like it. For the latter track, though, I brought in additional bluesy lead guitars, and purposely “mismatched” those over the other, patterned rhythm guitars – and it worked fine, because the musicianship of this unknown guitarist, was of a high calibre, and his beautiful blues riffs could have “fit” almost anywhere….by purposefully mis-placing them, I created some impossible and very musical moments in this metal / beautiful vocals track – a strange experience, but well worth it – I like this track!

So really, I am right back where I started, with music on an Ipad, often, Garage Band is the first thing you learn, and in my case, I am no exception, I did work with it for quite a while, until ambient apps came along and distracted me – once I had Scape, and Mixtikl, and Drone FX – that was me, away from “normal” apps like Garage Band, and when I did use normal apps, I favoured Nanostudio (and I still do!) as well as learning how to sample from the Fairlight, and so on – I began a long journey of discovery, that has now, in 2016…led me right back to the beginning, to where I started in 2011 – back to Garage Band.  Who would have thought?

Not me.

 

Now that the new Garage Band Eternal Album is loaded up at last, I am off to work on the guitar system which is undergoing yet another massive upgrade…as usual.  A game-changing upgrade I hope, including Pedalboard Mark 68, I can’t wait till it’s all sorted out…

 

 

Happy listening!

 

 

Dave