studio diary 20170705

well somehow time has really gotten away from me, and I’ve not managed to write a blog for a couple of months now.  I have an excuse (of course):  I’ve been busy.  Mainly, working on the new pedalboards and guitar system (more on that shortly) but also, still trying to “keep my hand in” by working on music in the form of a very, very large collection of new tunes created in Garage Band.  I would venture to say that over the past few months, GB became a bit of an obsession, to the point where my iPhone overfloweth with Garage Band songs and drafts, sometimes, just one or two versions, sometimes, six or seven if a particular song needs a lot of detailed work.

the net result of that, is that actually, both my phone and my favourite tablet, are currently overflowing, and later today, I will be offloading completed tracks, and also, completing incomplete tracks and then offloading them, and then, making sure I have final mixes of all unpublished tracks…so that finally, I can master them and upload them. Normally, this would be a handful of tracks, but if I am not mistaken (and this number might not be exact) at the moment, I have no less than 16 NEW Garage Band tracks to sort out and add to my Garage Band Eternal Album on Bandcamp.

Sixteen new tracks!  Now – I have been working pretty exclusively in Garage Band over the past several months, and not working so much with real instruments, etc. in the studio – and that is because when I have had time to work in the studio – I have had to dedicate that to working on the guitar system and pedal boards (plural).  Those have now grown to four in total, and in fact, just yesterday, I worked out a brilliant new system, for accessing the different sounds – I am using a very simple device, a “pan pedal” which is made by Ernie Ball, to allow me to “move” between my main studio set up (which currently is comprised of two pedalboards, which I call “Pedalboard 1” and “Pedalboard 2” (imaginative names, I know) and a third board, which, surprisingly, is named “Pedalboard 3”.  So I can be playing one sound via PB1/PB2 (which are currently chained together) and then I can “switch” over to take a solo on PB3 where a completely different sound is waiting patiently for me.

Having the pan pedal, also means I can “blend” the two sounds – and hearing that, you can get some amazing “stacked” guitar tones – because for the first time, I am actually running two complete stereo set-ups, through two separate guitar systems – and, I have the output of PB1/PB2 going to the board direct, while the output of PB3, is miked with two Shure SM-57 instrument microphones, and those are going direct to the sound card. This then means when I record, I can record two tracks of the direct sound on PB1/PB2 and two tracks of the miked sound of PB3 on two OTHER tracks which means I will then be free to mix and match however I want – using as much (or as little) of each of the two completely different-sounding stereo feeds.

I haven’t yet mentioned the fourth pedalboard – it has an incredibly imaginative name, which you will probably never guess – Pedalboard 4.  But – it does have a distinct sub-title, unlike the other three – it’s the Guitar Synth board.  It’s quite simplistic, but it is a viable very different sound source, and it can be easily chained to PB3 or otherwise incorporated into the mix since it’s also tied directly to the mixer.  So the Guitar Synth library of sounds is also readily available now – directly out of the mixing board.

Also – with just a very quick change of cables – I can re-route the pan pedal to move between PB1/2, and PB4, or, back to PB3, or if I really wanted – I could have it pan between PB1/2 and PB3/4 chained together.  Talk about sounds…that would be a lot of sounds.  Right now, I am pretty happy with my PB1/PB2 combination, panning to the little PB3 board which is great for distorted soloing.

Getting all of that set up and working, and finalised (for the moment, of course, until I change my mind again, or, more likely, until I think of a “better way” to do things) has taken up the last several months’ time, meaning that I have not had time to work with real instruments in the real studio, except to test sounds and boards – and I’ve been doing a lot of that.  I have successfully re-programmed my Ground Control MIDI controller with 200 awesome sound combinations, and successfully done a sysex backup of that new set of sounds.  So that challenge was finally sorted out after quite a bit of trouble…I have, however, finally cracked MIDI Sysex – which for a long time, was a mystery to me – no more, now, I know how to backup, and restore, the entire contents of my Ground Control…it’s fairly easy to do, if you are patient.

I do have one other aspiration, which I actually got this idea from Vernon Reid (a great source of guitar ideas – he has helped Eventide with a lot of their distortion algorithms – so I offer up my thanks to Vernon wherever he is!), which is to stop doing ALL of my effects in series, and do them in parallel (to be honest, I also remember the late, great Allan Holdsworth, describing the same idea in a guitar workshop) – running effects in parallel.  Vernon has discovered a nice little DOD Resistance Mixer (the model AC-240, to be exact) which allows you to run four in to one out, and he uses a few of these in his live set-up (which I saw on YouTube, of course!).  It’s brilliant, and I do plan to look into that when time permits.  For the moment, out of necessity more than choice, I am doing it “old school” – in series.  Given that I am running a lot of hardware in series, it actually is all sounding very, very good now.

Note:  later on this year, we are going to see Living Colour play live in a Glasgow venue, so I can’t wait for that – one of my guitar heroes – Vernon Reid, I will finally get to see and hear Vernon play – I can’t wait!  A great and greatly under-appreciated band, Living Colour.  One of my personal favourites…it”s going to be amazing. I am very excited about this concert!!

Anyway – based on the work I’ve been doing, I have decided that once I finished processing the outstanding 15 or 16 Garage Band tracks (which I plan to begin work on this afternoon) that I will no longer spend as much time working in Garage Band, or, if I do, it will be probably for ambient projects, rather than my endless exploration of Apple Loops mixed with “real” content i.e. bass parts “played” by myself, and instead, go back to working on real music with real instruments – primarily, the electric guitar.

I think that my obsession with Garage Band has finally run its course, but, the result of it is an already very interesting catalogue of music, but, once I mix and master the next 16 tracks of completed Garage Band music – it will become apparent what a brilliant tool it has become for music creation.  It is pretty amazing what you can do with it, and I’ve been working more with matching tracks up pitch-wise and timing wise, so, matching a “real” bass part to an Apple loop, for example, or pitching different tracks to fit better with other tracks.

It’s amazing how well it all works, and, I have had an absolute blast creatively, it is endlessly fascinating to me what you can do with a stack of pre-made loops and a little bit of crafty bass playing.  I’ve found that to be key in most of the compositions I have worked on – I might create an entire piece out of Apple loops, but then, to humanise it, I play a “real” bass part – and that does it, that suddenly makes the track “pop” – it’s weird.

For a while, another technique I would use, would be to have the first two thirds of each piece, be entirely artificial; all made from loops, and then suddenly, during the last third or quarter of the piece, bring in a “real bass” part and the effect is really dramatic – it really makes the tracks sound so much better, even if there is already a synth bass or whatever – having that wonderful, plain, “Paul McCartney” bass there makes the tracks irresistible.

I have spent a ridiculous amount of time perfecting some of those bass parts – which are often played on the fly in one take, and then close-edited later to sharpen them up – taking a wild, on-the-fly live performance, and custom-fitting it to the existing song.  It’s a lot of work – but it’s so, so worth it, because it just brings the pieces full circle, and the artificiality that the loops create, gets seriously negated by the humanness of the Paul McCartney plays as “played” by yours truly.

So when you finally get to hear the next 16 Garage Band uploads from me – please listen especially to the bass guitars – because I have indeed, worked really hard on those bass parts – which you will find in most all (but not all) of my Garage Band work.

I should also mention the other “star” of the Garage Band tracks, which is the Korg IWorkstation synthesizer, with it’s two dozen different sets of presets – if you search long enough, you can always find the perfect sound, and since Garage Band’s Inter-App Audio is so well implemented, it’s easy to bring in a powerful synth like the “iWavestation”, and I use it extensively, on multiple tracks, on almost all of my Garage Band material.  So those are my two secret weapons, really:

  1. Apple’s “Paul McCartney” bass, in “Note” mode, which I play like a real bass, then close edit later to “perfect” the bass part
  2. Via Inter-App Audio, I call up the “Korg iWavestation” synthesizer which can provide an absolutely astonishing universe of sounds from any kind of synth sound; any kind of beautiful, spacious pad sound, to drums, basses, whistles, you name it, it’s in there – one of Korg‘s most amazing products, ever.  It has become my “go-to” synth whenever I am recording in an app that offers IIA connectivity – the first thing I do, is bring in an instance or ten or the iWavestation – I cannot recommend it highly enough, it’s a great synth and workstation, too – absolutely amazing and sounds great.

The third and uncredited star, is of course, those amazing Apple Loops – without them, none of this amazing catalogue of work would exist, and I can’t believe how this incredibly diverse set of music, where every piece is completely different, where each time, I try to find a new approach, a new sound, to make it utterly unique, and, importantly, different from the last piece I did – and if you are doing this across dozens of tracks, you end up with a diversity of music that is almost indefinable – I could literally, not describe the different genres, types, feelings, grooves, systems, concepts – I just can’t, the only way to describe it is to say, go to the Garage Band Eternal Album, and listen to it from start to finish – and then try to describe in words what you just heard.

And when I add in the next 16, which feature some of the most diverse and weirdest, most out-there compositions so far – that will make the above experiment even more interesting.  If I were to continue with this, the madness of being addicted to Garage Band might send me right over the edge – I don’t know.

I am going to take a break, I am extremely happy with both the catalogue “so far” (note, as of this point in time, 20170705, the Garage Band Eternal Album contains 24 unique tracks) or to date, as well as, I am very excited about the next 16 tracks – which will close out the catalogue in the short term (bringing the total number of tracks to about 40 – which in itself, is amazing), because I am (with some difficulty, I admit) going to slow down or stop producing so very much Garage Band material, and return to working on real songs with real guitars and keyboards, and I am going to give the amazing, easy to use, fun to use, Garage Band – a well-earned rest.  Because if I am honest, I have spent altogether too much time working on Garage Band songs, and not giving my other musical outlets a chance!  Of course – that wasn’t intentional, they weren’t ready – but, now they ARE ready – so – I am ready.

 

It’s also my hope, to return to making ambient music, and in particular, ambient music made with applications.  I still have unexplored areas that utilise ambient tools that I have had for many years, as well as some newer apps that I also have not spent enough time with – so I hope to rectify that situation, and in the process, hopefully, add some new ambient tracks to some of the catalogues / eternal albums up there on Bandcamp.

 

I am hoping I have reached, or nearly reached, the “cut-off” point, where the total obsession with Garage Band ends, and a new practice of music-making begins, which involves using real guitars and my new pedalboards and guitar systems plural.  That is the idea, anyway – and that is why I have also spent the last several months trying to get everything ready for this day – and after extensive testing, and spending a lot of time creating 200 amazing and beautiful guitar sounds in my Ground Control Pro MIDI Controller – finally, everything is ready, and I have now, at my fingertips, a huge and diverse array of guitar sounds that I can use in my new compositions!  It was a lot of work to get to this point, and I am beyond pleased with the way my guitar is sounding – and that is not something I’ve said very often in my life.

Of course, Komplete will still be there to play it’s part, since I don’t have the space for a physical drum kit, and, I’ve never had the opportunity / chance / space / time to learn how to play a real drum kit – I still depend on Komplete to help me set up my real guitars-based tracks – mostly, with the drum tracks.  I also, often, will use Komplete to do basses – and certainly, I use it for keyboards and synths, along with other softwares like the M-Tron Pro mellotron software.

When the urge takes me, I do sometimes play real bass instead of Komplete’s bass, but using Komplete is truly tempting because it does contain toolsets like Scarbee’s amazing Rickenbacker bass samples, and I just can’t resist having the sound of a Rickenbacker or a Fender Jazz bass or a Fender Precision on my tracks – I love those basses, and being able to “Play” them, even via a MIDI keyboard – is heaven.  My cheap throwaway bass cannot compete with those sampled basses for tone – it was so cheap, that I actually paid nothing for it – a good friend of mine, and an amazing musician, too, Michael Dawson, actually gifted that bass to me – which I have subsequently used on certain tracks, one of which was the tribute to the late John Wetton – “Wettonizer” is the one main track I remember using the “free” Washburn bass on.  It is actually, a lot of fun to play (it’s tiny, and I am not!), so maybe I will add in some “real basses” as well as using the amazing Rickenbacker and Fender samples available via Scarbee via Komplete.

In essence, in the studio, Komplete is my “band” – they come up with the bass and drum tracks, and if needed, keyboard and synth tracks – and then, I am left to play real guitars on top of those created tracks.  It’s as close as I can get to having a real band to play with at the moment – and again, I don’t have the space available for a real band anyway, so at the moment, the Komplete “band” does me more than proud – and you can hear exactly how well they do, by listening to a couple of my larger works, where they are heavily featured – in particular, on “the complete unknown” “planet obelisk” and “day seventeen” – these are examples of the full Komplete band – drums, bass, keyboards – supporting me, the man of many guitar parts :-).  It takes weeks or months to get the drums, basses and keys in place on tracks like these, and it’s not uncommon that three months might pass, before I get to play a single note on the guitar.

(Note: all of the tracks noted above, are all taken from the dave stafford “progressive rock” eternal album – please have a listen on Bandcamp).

 

Of course, it does take time, creating drum tracks, and bass tracks, and keyboards and synths – but it’s worth the time, because I want the best possible backdrop for guitars – and with Komplete, I get the best there is.  For example, depending on what kind of era I want to emulate, I tend to use the Abbey Road drum kits, and I can choose from a vintage 50s kit, a 1960s kit, a 70s kit, 80s, kit or “modern” kit – and each one has it’s own character and options, and they sound absolutely amazing – so I tend to mostly use those, although there are many, many other drum options within Komplete…Abbey Road drums are my current favourite, and they can be heard on a lot of my works.

I have also favoured the Scarbee Rickenbacker bass, using different pickups and presets, for a lot of my pieces, and I think Scarbee is an absolutely amazing company, the care with which they create their instruments is exquisite – the details are absolutely stunning.  I can get so many amazing tones out of that Rickenbacker bass, I could just about not ever use any other – except of course, when I do need a Fender bass for a deeper, more traditional sound – and then, I turn to Scarbee once again – and in many cases, they even offer an “amped” version – so you can have just the bass, or, the bass sampled through amps – it’s amazing – I am totally spoiled for choice.

After a lot of hard work, especially the programming of 200 custom preset guitar “sounds” on the Ground Control Pro, I am ready to play some serious guitar – but, serious guitar with the best tones possible.  I have really chosen a bit of a strange path, over the years, I have mostly stayed away from “guitar amps”, instead, using a plain power amp, and asking either software, or, my pedalboards, to be the main source of “tone”.  Now I am in a hybrid set up – I am using an amp, or actually, two amps – one is a solid state guitar amp, which has a line out to the mixer, and the other is my plain power amp, where I am miking my two 1X12 guitar cabs direct to the sound card.  The “tone”, however, is the tone of whatever guitar I am playing, plus, what sound colourations are available from the pedalboards – which of course, include the many-faceted Eventide H9s – each of which contains a massive library of absolutely astonishing, high-quality sounds.

When I think about what is possible with just the H9s (ignoring all other pedals for the moment) I kinda wish I had more than 200 slots in my MIDI pedal, but the truth is, by combining different H9 algorithms, the number of possible insanely good guitar sounds, is not just 200, or even 2000, it’s probably more like 200,000.  Seriously – and, Eventide keeps adding in new algorithms, too, which just increases, exponentially, the possibilities, to basically, limitless – the latest new algorithm, “Pitchfuzz”, contains some amazing new distorted and / or pitch-shifted sounds, which are out of this world, and, of course, I have incorporated the best of those into my 200 presets.  Using the H9s in multiples, makes it possible to create combinations of effects that are truly lush and incredible sounding – you have to hear them to believe them.  Exquisite combinations of beautiful, individual sounds…

I did spend a bit of extra time on one particular sound that I truly love, and I got this idea straight from Allan Holdsworth (may he rest in peace) – on the first of several occasions where I was privileged to see Allan play guitar, he had this amazing “swell” sound, where while the bass and drums played a kind of “drone”, he would “fade in” or “swell” these beautiful, clean chords, which were drenched in layers of delay and reverb – and I never forgot how beautiful that sounded live.

During the Bindlestiff years, I even tried to emulate that sound, by fading the sound in manually with a volume pedal, into a huge reverb “room” – close, but not quite.  But now – in the land of H9s – I can have auto-swell, at any time setting I want, and it’s brilliant.

I took this opportunity to create some special Dave Stafford auto-swell settings; starting with a short auto-swell (1900 milliseconds), then, medium (3100 ms) and finally, the “Allan Holdsworth” series of auto-swell (my “long” swell at 4000 ms or 4 seconds) – and I made several variations of that basic sound, running the swell through various different Eventide Space reverb sounds, and in one final example, through a beautiful Eventide delay and then into a beautiful Eventide Space sound.  The result is a mini-bank of amazing “swell” variations, and I am so glad I took the time to work out the programming for those sounds – taking care of details like that, gives me an edge, it gives me something unusual, not stock – but with my own personality – these 200 sounds are Dave Stafford Guitar Sounds, regardless of whether they are “stock” or “custom” – they are my choices and juxtapositions – and it’s so nice to have such an amazing library of “algorithm meets algorithm” possibilities.

This afternoon, then, will be dedicated to downloading (and, clearing off, thank god) the 16 new Garage Band pieces, trying to first get the final mixes just right, then, the mastering, and finally, probably starting in a few days’ time, uploading them – and once uploaded, the Garage Band Eternal Album will have reached about 40 unique Dave Stafford compositions done over a relatively short period of time – months – but, in terms of sound, and quality – it’s a huge, huge sound – and, a catalogue of which I am both very proud and very fond of – I have really enjoyed my “time of Garage Band”.

You should try it – drop everything else for a while, and just create with Garage Band – a piece every couple of days was usually my method, although some of the more complex pieces might then stretch out to a week or two until I was happy with the final version – and then, immediately, start another one – preferably, something that sounded COMPLETELY different to the piece just completed.

In a week or two at most, you will be able to hear all 40 tracks, and these should give you a good glimpse (at least) – if not an amazing view – of what this creative and innovative Apple tool – one of the oldest “computer-based” music making tools (now, mobilised on the iPhone and iPad, of course – in the Apple way) can do; and, with it’s latest updates, it has become one of the most fertile, stable, and unique grounds for growing musical ideas.

Anyone can have a go – drag some Apple loops into your song, and you are away – dream up any kind of music you like.  Just do loops if you don’t want to play, or don’t know how – you can still create, using the magical Apple loops, if you do play an instrument, then you have the opportunity to add in some keyboard based or drum or bass content of your own.  It’s easy to learn, and endlessly expandable, you can add many, many bars and create very long pieces, or create three minute pop masterpieces – it’s all there with Garage Band.

 

And now – to mix, download, master and start getting those new tracks uploaded – I can’t wait !!!

 

 

peace and love

 

dave 🙂

 

 

 

 

 

 

 

 

 

 

Advertisements

the making of an epic prog rock “monsterpiece” – part two

So – the stage is literally set, I’ve at this point, got the majority of seven months’ of work behind me…

My last blog, recounted the first seven months of the project in a fair amount of detail – that was part one – but here in part two, we are looking at the final few days of work – the last four or five days in December, 2015 – that’s our “part two”:

 

The drums and bass have been locked down (except for final level setting, of course) for many months.

The keyboards are all locked down, and the intricate middle section has been completed, encompassing acoustic guitars, birdsong, ipad, and ambient electric guitars (the infamous “Hackett Guitars” – courtesy of the new Eventide H9 multi effects unit – that occur just before the second half of the song re-enters).

All that is left is – more work (on the second half only, after the new “middle section”) with the guitars, a few needing solos, and a few, needing some rhythm guitars.

I decided to use some of the extraordinary sounds from the Eventide H9 multi-effects unit, which only arrived in the final days of work on the song, so using it as my main guitar effects unit, that enabled me to do, for example, the ambient “Hackett Guitars”, as well as some of the rhythm and lead guitar work in the final section during “part two” – so I would characterise “part one” as being the main build of the song, plus, the first part of the guitar overdubs; while “part two” is two things, finishing touches – all done on guitar – and mixing, mixing, and more mixing.

I had originally thought that I would play a series of different guitar solos over the second half of the mix, but things happen…plans change.  And in this case, it was one of those weird accidents that you just can’t deny, that you have to go with – because you hear it, and the sound of it just says to you, you know it in your heart: “you know this is the right thing”.

I sat down to play the first of many solos, which, by my cunning plan, would have filled the end of the main track from the end of the middle section to the end of the song, bit by bit, a short burst of one guitar sound, a short burst of the next, and so on. The first solo, was to be an ebow solo.  So I got a nice sound for the ebow from the H9, and started making takes.

But what happened was something I never expected, as the track kept playing, after the section I was overdubbing – I kept going, I kept playing after the first section went past…and then the next, and then the next…and suddenly, I could hear the very end of the song approaching – so I went for a crazy, major key ascending scale that could not possibly fit at the very end of a really, really LONG ebow solo – and of course, almost as if it had planned that way – it fit just right, ending right alongside the existing “fast-Leslie” organ solo…

I listened back, astonished – because I never meant to play right through, I hadn’t imagined finishing the entire track with one very long, multi-key energy bow guitar solo – but that is exactly what happened.  At first, I thought, well, this creates a problem – what do I do?  How can I play different sections of lead guitar now, with this really nice solo filling up the entire second half of the track?

The answer, of course, was “you no longer need to”.  So instead of doing piecemeal solos, using different guitar sounds, etc. (as I did in the first half, as planned…) the second half now features one long, long ebow solo (which, to be fair, is actually in five sections, edited down from the best three takes – but if I had not told you that, you would not have known – it sounds like one solo – well, it is one solo, just, from the best three takes!) – it was quite a feat of editing, but editing ebow solos is one of the most amazing procedures out there, because – well, because a recorded ebow sounds, looks and acts like a pure sine wave, fading it in and out is never an issue, at a microscopic level (zoomed) or even at a normal level (not zoomed) and “switching” from one solo to another, from one take to another rather, at any point, is almost always very easy, because the notes are usually quite long, and, whether they are long or short, they have distinct silences in between – the perfect space to switch between take 1 and take 3, for example.

The editing task then was not that difficult, but I did spend quite a lot of time on it, as I wanted this final solo to really bring the whole piece together, and once I got used to it – I realised that it was the best idea all along – because it’s the only opportunity, really, for a nice long guitar solo – and there is nothing on earth like a nice long ebow solo – it’s the best! – so…I took that opportunity.  Accidentally “on purpose” 🙂

So while unintentional – that “accident”, of me just carrying on playing that ebow solo, not stopping when I should have – going on and on to the very end of the song – changed the whole planned character of the second half of the song, and gave me a glorious, long and lovely ebow solo to take us out to the final moments of the song.

I did some work with panning towards the end of the piece – I boosted the level of the existing “fast Leslie” organ solo to match the ebow solo better, and I gradually moved it from the centre to one side of the stereo image, while at the same time, in the opposite direction, I gradually moved the ebow solo to the opposite side of the stereo image, so it moves from being a homogeneous centralised pair of instruments at the beginning of the second half, to two distinct instruments, one on either side of you – and I love that slow, slow stereo spread of the two solos – it works for me.  In headphones, it’s very nice indeed.  On speakers, you might not really notice it as much, but it’s an important point – I wanted the solos to end, with them split, one hard left, the other hard right – and that is indeed, what I ended up with.

I think at that point, I breathed a huge, huge sigh of relief – because, except for a very few finishing touches – this long ebow solo meant that the song was “DONE”!!  At long, long last, and just before the year ended, too – it had always been my goal to complete the song in 2015, to allow it to then become, pureambient’s first release in 2016.  So I am happy to report that I did indeed, with just hours to spare, meet that goal.

So – what finishing touches? Well, I added in a few rhythm guitars, where I felt that solos needed some chord-based support, but overall, there is not a lot of rhythm playing in this song – being a prog song, all of the players (i.e., me, lol) love to play solos, they all think that they are master of their own instrument – so you have a whole band full of soloists!

But the lead guitarist (again, that’s Dave Stafford, lead guitar), can be, and did indeed, allow himself to be persuaded that some rhythm guitars (well, more than he had originally done or planned for, anyway!) would not go amiss.  One of those rhythm guitar parts, a simple chord played once and left to ring, for four bars, sounds nothing like a guitar, but rather, some mellifluous dream electric piano from the stars…a beautiful H9-produced sound.

I added some lovely chords in the second half of the piece, using the H9 to get some beautiful new clean sounds (and the modulation section of the H9 is simply the best – better than any effects unit or software I have ever owned – it is the best, for those of us who cannot possibly, ever, afford an “Axe-FXII” – this is just as good or better!) so I am really pleased with the last few guitar contributions – because the H9 makes them sound really, really good!

I also realised that so far, I had not woven any reverse guitar into the fabric of the song, and I love reverse guitar – I’d always meant to do a reverse solo – but I hadn’t done any so far in the song (a huge oversight, surely!) – I mean, come on, this is prog – so in the style of King Crimson circa 1970, I thought of “Prince Rupert’s Lament” (or rather, the “Lizard” suite) I decided I would add some reverse guitars in that style, clean and nice – so – how could I now incorporate it?  Where there is a will, there is a way – I recorded a few different takes of reverse guitar (again, courtesy of the remarkable H9 pedal) and then mixed them into the closing section of the song.

That took some getting used to, in fact, all of the changes to the second half took me some time to acclimate to, because for so long, it had just been, you know, drums, bass, keyboards, mellotron.  No guitars.  No rhythm guitar.  No reverse guitars.  So the second half evolved, and the more I worked on it, the happier I felt – I really felt good about this piece of music, and despite how long it took, and the many, many long hours and long days I had to put in to get it there (the weeks spent on the drums and bass alone ate up the first two months!!!) and there were times when I thought – “I am never going to get to play the guitars on this song….never!” – but, the day finally did come, at the end of November actually, and I really went into it with a happy heart – finally, I am working out guitar parts, to go with the long, long-existing bass, organ and mellotron parts.

Playing guitar along to the finished backing track was an absolute joy, and I could just jam along to almost any of the sections, because I know them so, so well by this point – I could just about have played the guitar parts LIVE really, once I’d rehearsed them.

I did go back, too, and “try again” on some of the toughest solos – I spent one entire day, “seeing if I could do better” – and in almost every case, I found that I could, so I ended up with some very natural sounding, very “live” guitar solos – where previously, in the initial final mixes (I know, that sounds odd, but, it’s the only way to describe it) I had kinda, pieced together some of the more difficult guitar parts.  No more, though – now, they are played live, as are most of the solos – the final ebow being the one exception to that – but, it’s very, very long, and it’s not likely that anyone could play for that long, without some imperfections – so I did have to fix a few touchy moments in the long solo.

Mostly, the guitar parts kinda “wrote themselves”: there were areas where they simply join the bass for a ride-along; and other areas where they do not, but instead, they mesh or interact with the bass – and there are some spectacular bass v. guitar “battles” in the first half of the song that could not have come out better had they been planned (and, they were NOT planned – it just worked out that way – when I added the guitar parts, the bassist was RIGHT THERE, answering me – it was amazing! – the guitar would play a riff, and suddenly, there was the bass, ripping off a super quick “tiny-space”-filling-run, at impossible speed (that’s our bass player, Dave Stafford, again!) – and it sounded like both the guitar and the bass had always been there, that the interaction was totally planned and totally natural…when in fact, it was yet another “happy accident” – but the joy that it brought me the first time I heard it play back – wow! Listen to THAT, was well worth it – the guitars and the basses are totally working together, playing off each other as if it’s a live track!

Sometimes, you are very, very fortunate.  I was really fortunate with the way that the final overdubs, the lead guitars worked with the drums, worked with the bass, worked with the organ, and worked with the mellotron – and in fact, the mellotron came and went with the eeriest perfection – perfect timing every time, arriving right when I needed it.  As if they knew what the guitar parts would be (when I clearly, did not!).

I think then, that the reverse guitars were the last significant thing that was actually played on the track; after that, the last two or three days of December, 2015, were spent on the final mix, which I sorted of re-built from scratch – I’d had a “working mix” the entire time, but rather than just carry that forward and build in the new parts, I decided to create a brand new, fresh mix, which gave me the opportunity for example, to ensure that the bass and the drums, could compete with the masses of guitars, and the intense keyboard and mellotron washes – I wanted to be able to hear everything as clearly as possible (obviously!).

Getting a nice clean mix when there are this many instruments can be tricky, but I just approached each one, first, separately, and then, in relation to the other instruments, until I reached a point where I felt happy with everything.

I also stripped out a lot of “individual” reverbs and other effects that I had quickly thrown on during production, and consolidated them in the output section – I created a full set of additional stereo bus outputs, so that every set of instruments had an overall level control, and, consistent, high quality, reverbs and effects – made at the output stage rather than connected directly to the track.

Certain tracks that were created early on, were just too complex to move to a bus, so I left them alone with their track-specific sounds – in one case, a complex arrangement of Waves GTR and Waves Stereo ADT – used for an extremely strange “guitar” track that slowly, slowly fades in during the first quarter of the song.  That was left alone, along with the bass which was sent out directly without any effects whatsoever – I wanted it to be dead clean.

I didn’t mess with the drums too much, either, I probably would have (I do love adding phase shifters to hi-hat and cymbal hits and similar…), but I didn’t want to add another two months to an already somewhat overly long-production schedule!  So I kept it to some bespoke panned sections (which I really, really like, because they appear so seldom!), and just little touches – the drum track is pretty basic, and the bass is just bass – in this case, the tone of the Scar-bee Rickenbacker is so perfect, I couldn’t see putting any effects whatsoever on it – so – it’s dry and clean!

So really, mixing was quite easy, mainly because I was so, so familiar with all of the component tracks, and with the individual stereo buses for guitars, organ, mellotron, bass, drums – getting relative levels was easy!  I had expected an agony of mixing hell – and the song surprised me – maybe because to some extent, I kept it simple (well, simple when compared to something like “wettonizer” (taken from the newest eternal album, the first of 2016, “progressive rock” by Dave Stafford), I suppose!).

Note: “wettonizer” was originally included on the gone native CD (which is still available) and download, but is now also available on the brand new 2016 eternal album collection “progressive rock” – alongside the brand new track “the complete unknown”.  This is comprised of a set of prog songs taken from gone native, along with  “the complete unknown”.

The very last part of the song, after that energy bow climbs up to the top of that unlikely major scale, and then SLAMS down into reverb with an odd but lovely sound of wonderful completion, the song then almost comes to a halt, the keyboards are pretty much all that is playing, until suddenly, the Rickenbacker bass and the Hammond organ, join the drums for their final flourish – and then, a long, pure bass note is held, to remind us I think, of purity, of the beauty of just one note – and then, the drummer plays a few bars of precision military snare roll, and the long bass note and the snare drum, disappear forever into the complete unknown…the song is over.

I really, really enjoyed myself on this project, my only regret is that by becoming so involved in it, I was really unable to work on much of anything else, so other areas of my music suffered.  But that will change in 2016, I have an enormous amount of new music in the planning stages, including still more eternal albums on Bandcamp, and I hope to present more musical material, both old and new, in various formats, including hopefully, a return to video as well as audio only work.

We shall see!  But in the meantime, if you fancy a bit of old-style progressive rock, this could be the 17 minute long song for you – “the complete unknown”.  Give it a listen – it will take you right back to 1974…

 

Peace, Love and Groovy Mellotrons,

 

 

dave

pureambient hq

january 17th, 2016

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

universe of sound (the komplete world)

after forty-odd years in the music business, we decided at the start of this new year, that we would acquire a software suite called komplete 9 ultimate for use at the pureambient studio. the software comes from a remarkable german company called “native instruments”, who are truly the masters of sampling technology – and a few other things, too –

 

KOMPLETE 9 ULTIMATE – OVERVIEW & PRE-APOLOGY

 

this acquisition was intended to fill a few glaring omissions in our capabilities, such as proper strings, horns, basses, percussion, and so on, as well as providing the main elements for extending the classical music that we began releasing last year on the eternal album “classical”. this tool will allow for a speedier construction of classical pieces, rather than relying on the more piecemeal approach used on my first piece of classical music, “concerto no. 1 in e minor for oboe and guitar” – which was constructed almost line by line, using nothing but a guitar synthesizer.

 

as well as supporting classical music over the coming years, komplete 9 ultimate is also a natural for, and is eminently suited for, the production of music for films, which is another area that we hope to expand into over the coming years. this acquisition also bolsters the worlds of ambient music, as well as pop, rock, funk, jazz, and countless others – it’s hugely supporting in all genres, especially ambient.

 

we’ve only been using it for a short while, but already, we can see the enormous potential that this software suite has for adding quality sounds to the pieces that we create here.   and, it’s infinitely expandable, too, native instruments have purchased third party sound libraries and bundled them into komplete 9 ultimate, but you can also purchase other third party programs which you can play using komplete 9 ultimate “kontakt” sample player. so we will also be looking to acquire some of the best ambient libraries, which will also greatly expand our capability.

 

before I speak more specifically about what komplete 9 ultimate can do musically, I’d like to apologise to all early adopters and those who own komplete 9 ultimate or “kontakt” or both, I freely admit I am an absolute novice, I’ve been studying the suite in detail, learning the processes, slowly, over the past few weeks, and I do have a basic understanding in principle for most of what can be done with komplete 9 ultimate.   forgive me in advance if I say anything that shows just what a rookie I am at this, or I otherwise put my foot in my mouth – learning something like this can be a somewhat slow and painful process, even more painful when you are no longer young as I am. and – komplete 9 ultimate users – feel free to jump in and correct me, or offer advice or expand on anything I mention here – we are all of us learning at all times…and it’s best to share such knowledge freely.

 

my friend and collaborator ken mistove, my partner in saffron matted voids (the band), is a long time “komplete” user (I am talking about really long time – ten years! – and he has been doing electronic / digital music for longer still), and he warned me that I would be overwhelmed by this program – and, he could not have been more correct. in fact, weeks after it’s arrival, I continue to find more and more incredibly well-thought-out functionality, as well as becoming familiar with the synthesizers and the sample content. and it is almost totally overwhelming – it seems, almost, as if there is nothing this device cannot do…everywhere I turn, everywhere I look, I find something else that makes my jaw drop…

 

 

 

KOMPLETE 9 ULTIMATE – THOSE AMAZING SYNTHESIZERS

 

[ULTIMATE INDEED!]

 

 

so – where do I begin?   well, when it came down to it, even though I was incredibly excited about the sample library, and the sample player (which allows multiple instances of many, many instruments in one session – I had fourteen instruments loaded into a session yesterday, and the software coped beautifully) – it was the synthesizers that I gravitated to initially – because, perhaps, I knew they would be easy to set up and use – familiar. before we purchased komplete 9 ultimate, I had read in detail about the synths, so I couldn’t wait to hear them in person – and I was right about the ease of set up and ease of use: within seconds, I was up and running with “absynth”, a personal favourite synth that seems to favour ambient and atmospheric sounds.

 

but “absynth” is a drop in the bucket, a handful of stars in this incredible universe of sound, and while it features hundreds and hundreds of truly beautiful preset sounds, it’s just one of nine synthesizer models built into komplete. the entire list of available synths looks like this:

 

  • absynth
  • fm8
  • massive
  • monark
  • razor
  • skanner xt
  • reaktor (modular synth system – containing many synths)
  • reaktor prism
  • reaktor spark
  • retro machines (which contains no less than 20 classic synthesizer instruments within)

 

so far, I’ve only truly managed to hear and use five of these synths, absynth, fm8, massive, reaktor prism, and retro machines, but even so, I’ve been utterly impressed with the build quality and the amazing attention to detail – this is precision german engineering like we used to have back in the 60s and 70s!

 

I have created a few test pieces in absynth (consequentially falling in love with it); I created an entire suite of 23 pieces using the fm8 synthesizer dave stafford – music for pcs: komplete synths”, I’ve created one very complex ambient piece (which is incredibly atmospheric) using massive “wanders down to the sea”, and for fun, I’ve played some of the classic organs, electric pianos, etc. in “retro machines” – “synths within a synth” which is a strange way of working, but I am getting used to it 🙂

 

in every case, the attention to detail, and the extremely fine level of control over sound in every one of these synths, has been overwhelming and most, most welcome. I have a lot of soft synths, but this collection of nine software synths kind of…blows away the competition, and as my friend ken mistove also said: “you will never need to buy another instrument” – and I can already see the truth in that.

 

while I might not “need” to, of course, there will still be some cases where I will “want” to – I am especially interested in some of the available third party ambient sample libraries, but that will have to wait – in the meantime, I have an awful lot to learn and trial just with the komplete 9 ultimate package itself.

 

after my initial very positive experience of playing and using “absynth”, I moved on to “massive”, and I decided to lay out and record a track using four instances of “massive”, each set to a different sound – and I then did a somewhat clever arrangement where I muted sections of each track, to allow other parts to shine through, creating a sort of ever-changing mood – a dark mood, with the sound of wind and seagulls crying and a vision of a bleak, grey storm-tossed day – again, I was amazed at how quickly and easily I could set up four instances in my host (my somewhat antiquated SONAR 8.5) and it coped beautifully – no problem.

 

I also created a short ambient piece within “reaktor”, using the “reaktor prism” synth; a portion of this track remains, entitled “fragment of a lonely molecule” – a truly beautiful sounding synth, which I plan to revisit often and use much, much more…

 

encouraged by the success of “wanders down to the sea” in “massive”, I then turned my attention to “fm8”, in which I created a whole series of tracks (“the rings of saturn”) from “dave stafford – music for pcs: komplete synths”, as well as some arranged “suites” where I took a set of smaller files and mixed them into long, linear sequences – providing a blended view of the basic tracks, as opposed to the individual view of each piece.

 

a few hours later, I realised I had created no less than 23 tracks using “fm8”, and I am so enamoured of this synth, it has a lot of great, visceral sounds, and a lot of charming, melodic, or dissonant, or strangely jazzy, arpeggiators, and the sheer range of voices available within fm8 is mind-boggling. It was a fun session, and as such, I made the decision to create two eternal albums for komplete: one for “komplete synths” (LINK) and one for komplete samples (LINK).   These have both been up and running for a couple of months now, and while the “komplete synths” album has a reasonable number of tracks, I’ve been very slow to create using the “samples” – but, I will get there, I will – I just need time! 🙂

 

the 23 tracks made with “fm8” and the one piece made with “massive” “wanders down to the sea”, are all uploaded to the “dave stafford – music for pcs: komplete synths” eternal album. I plan on working with each of the synths in turn, and uploading the results, so you can hear what each one of these remarkable sound creation tools can do. If I have my way, by the end of this year, the “komplete synths” eternal album, will have dozens of tracks made with a myriad number of available synths – and I hope I can just keep creating and creating – those are 9 amazing synths, each a master of the domain it covers, and I can’t wait to create more music with all of them – the synthesizers built-in to komplete 9 ultimate are absolutely brilliant!

 

THE HIDDEN GEM WITHIN KOMPLETE 9 ULTIMATE – GUITAR RIG 5

before I continue on to the samples section, I must not forget to mention one of the biggest selling points of komplete 9 ultimate, for me, which is the presence of “guitar rig 5 pro” – I had been underwhelmed by an earlier version of guitar rig, which I got bundled with SONAR, “guitar rig 3”, so I’ve now uninstalled that and I am using “guitar rig 5 pro” instead.

 

what a difference. the preset library is vastly improved, and the range of effects, and the flexibility provided in setting them up in the rack, are simply astonishing – to me, this is one of the most important pieces of guitar software to come along. so after working with the synths, purely for fun, I recorded a handful of pieces using “guitar rig 5 pro” – and I am more than impressed with the sound quality and the presets – it’s an awesome and powerful guitar amp and speaker cabinet emulator, and it has a huge range of high quality guitar effects as well. a couple of these pieces may see the light of day, but they were mostly for reference, and just a way of trialling certain patches and sounds.

 

this is now to the point, since “guitar rig 5 pro” is clearly superior to many guitar processing devices in both the hardware AND the software arena – I am at the point, where I can now happily retire my ailing “line 6 x3 live” hardware pedalboard guitar effects processor, which is now basically redundant (it has served me very well since 2008, but it’s now time to be retired at long last).

 

because I can pretty much re-create every sound in the line 6 using “guitar rig 5 pro” instead, and more – so that’s actually a blessing – no more effects on the floor (although I will always have my faithful “output chain” of hardware effects, harmonizer, delay, reverb at the end of my signal chain) I believe I will now use “guitar rig 5” for most of my guitar sounds, and anything it can’t handle, I can program into my gr-55 guitar synth – so guitars, and guitar signal processing – are covered! and I mean…covered.

 

it’s always very difficult, because over time, you have various tools that you use to record guitar or synths with, and eventually, better tools come along. and, you can run both old and new, that’s not an issue, if you want to – but my preference is to keep effects units down to a dull roar – so I am going to TRY to retire the line 6 x3 live – I mean, it is six years old, which in dog years, is, I don’t know, 70 years or something – and technology has moved along SO FAR since the X3 Live was designed…

 

so for the first week of my fledgling native instruments life, I learned about the synthesizers and I learned how to run “guitar rig 5 pro” – and that was a huge amount to learn, but, I have the basics down, and I can rely on both the set of nine included synthesizers (plus 20 more vintage instruments within “retro machines mk II”) and the extremely impressive “guitar rig 5 pro” interface. I could have gone on working with the synths and guitar rig for weeks and weeks, but I wanted then to shift gears and look at the sampling capabilities of “komplete”.

 

SAMPLING – THE HEART AND SOUL OF KOMPLETE ULTRA

[REAL INSTRUMENT SOUNDS – AT LAST!]

 

the list of sample-based instruments is even more impressive than the list of synthesizers:

 

  • kontakt – the main user interface / sample player for all sampled instruments:

 

kontakt is a very powerful environment, that allows you to load multiple instruments (built by native instruments, and many other vendors as well), which can then be routed either each to their own output (for maximum recording flexibility) or they can be routed to various stereo or mono sub-mixes – really, whatever your heart desires. you can save overall “presets” in kontakt itself, so if you hit upon a winning combination, say, “abbey road drums 1960s” and “scar-bee rickenbacker bass” and “guitar rig 5” you can save that configuration, including whatever output configurations you have, as well as the specific settings of each device – to a kontakt “preset” – for easy recall / re-use..

 

another positive aspect of the kontakt sample player is it’s ability to play not just native instrument plug-in instruments, but also, instruments made by third party vendors such as soniccouture, waves, scar-bee, g-force, and many, many others.

 

each instrument that is loaded into your kontakt session, also has a page for it’s settings, where you can choose instrument presets, adjusting the sound of the instrument until you are happy with it – then, you save your changes – then, you save your kontakt preset – and all of the instrument settings are saved as part of your “overall” kontakt saved preset – fantastic. so you can create very complex presets, that contain your favourite instruments, set just the way you want them, which can be recalled instantly in any combination – it’s absolutely outstanding.

 

here is the seemingly never-ending list of sampled instruments that come with komplete 9 ultimate.

 

  • action strings
  • session horns
  • damage (industrial and orchestral, cinematic drums and percussion)
  • evolve
  • session strings pro
  • evolve mutations
  • evolve mutations 2
  • battery 4
  • abbey road vintage drummer
  • abbey road 60s drummer
  • abbey road 70s drummer
  • abbey road 80s drummer
  • abbey road modern drummer
  • studio drummer
  • west africa (a personal favourite)
  • balinese gamelan (another personal favourite)
  • maschine drum selection
  • scarbee rickenbacker bass
  • guitar rig 5 pro
  • scarbee funk guitarist
  • scarbee mm-bass and mm-bass amped
  • scarbee pre-bass and pre-bass amped
  • rammfire
  • scarbee jay-bass
  • the giant
  • vintage organs
  • alicia’s keys
  • george duke soul treasures
  • scarbee a-200 electric piano
  • scarbee mark I electric piano
  • scarbee clavinet/pianet
  • berlin concert grand piano
  • new york concert grand piano
  • vienna concert grand piano
  • upright piano

 

bear in mind that each one of the above instruments, has a broad range of “presets” giving you as many different optional sounds for each instrument as is possible, “muted”, “picked”, “fingered”, and so on – so it’s not just a “rickenbacker bass” – it’s a rickenbacker bass that can be configured from anything such as a very timid, high pitched highly eq’d clean bass sound, to various much louder presets that emulate different sounds that this bass is capable of, and that includes both DI and “amped” sounds, so you get an enormous range of flexibility with every instrument listed above!

 

as explained elsewhere, those settings can be saved as part of a kontakt “preset”, so you could have one set up with a super clean, thin sounding Ricky bass, and another with a very distorted Ricky played through an emulated British amp – two EXTREMELY different “bass guitar” sounds from the same instrument.

 

In the classical world, the options are of course, much different to the options for a rock instrument, so for violins, you would have a huge range of various playing styles or articulations, legato, staccato, pizzicato, and so on – and just about any kind of articulation you can imagine, including some rather obscure ones, and also, it’s incredible to get these precision articulations, and of course, as with all quality samplers, there are also extreme velocity choices, so that you can emulate the velocity that you would apply to the real instrument, on the keys of your keyboard instead. all of these options are on every instrument where they exist, although some instruments may have just a handful of possible presets or articulations, others may have dozens – maximum real-life playability issues have been addressed as much as humanly possible.

 

 

…not to mention a massive range of high quality software effects and audio processing tools included in komplete 9 ultimate:

 

  • solid EQ
  • solid bus compressor
  • solid dynamincs stereo compressor
  • rc-48 reverb
  • rc-24 reverb
  • vari comp compressor
  • enhanced EQ Equaliser
  • passive EQ Equaliser
  • transient master Equaliser
  • driver distortion unit
  • VC76 FET compressor/limiter
  • VC2A electro-optical compressor/limiter
  • VC160 drum compressor
  • the finger – live performance and remix tool
  • the mouth – generates melodies and harmonies from any audio input
  • reflecktor high performance reverb effect

 

 

for full details, have a look at the product page on the native instruments site:

and here is the effects page on the native instruments site:

 

 

my first foray into the world of sampled instruments was a piece I created using various sampled elements, entitled “the giant’s causeway”, which contains three sections:

 

1)     “the giant prelude” features “the giant” cinematic instrument (a cinematic / orchestrator / ambient piano kind of sample set) – I played one take, which was best, and that became “the giant prelude” – perfection.

 

2)     “allegro in a minor” features “action strings” (which include moving passages of strings created with an “animator” function – which is truly awe inspiring)

 

3)     “giants on the causeway” following, the third and final section of the piece; features a manually played drum part;/ the scarbee “rickenbacker bass”; and a truly beautiful flute and strings mellotron sample, plus a short solo on a vintage organ.

 

“the giant” instrument just blew me away, I did a take one take of a sort of reverse piano strings/unknown kind of sample, and it came out totally usable – in one take!!! I will absolutely be revisiting this instrument, and I could see creating large, ambient compositions using JUST this instrument.

 

once “the giant” section was recorded, I added in the “action strings” instrument, and spent quite some time writing and laying out a short violin quartet piece in the key of a minor. note: this is where the “staff” view in SONAR becomes invaluable!) while short in duration, the SOUND is amazing, it sounds so incredibly real (because, let’s face it – it IS real!) because of the use of the strings animator – which gives you real “sections” or “passages” of bowed strings – in a significant number of styles, legato, staccato, pizzicato and more. this section took me a while to complete, but eventually, I did finish it to my satisfaction.

 

the third part of this unfinished piece was a rickenbacker bass line, set against some manually played drums, finished off with a live mellotron take, flutes and strings – plus a short solo on a vintage organ – and I have to say, the scarbee rickenbacker samples are out of this world – there’s even a “british” setting which gives you a roaring live distorted chris squire sound that just blows you away. even on the clean settings, this instrument screams “I am an authentic ricky bass” – and the distorted scarbee bass part just SOUNDS amazing…

 

this piece remains unfinished, but I always considered it as a test piece, a learning curve, a learning tool, a learning experience. I did rough mixes, and kept the three sections separately as demos, but I don’t believe that this piece will be published, but if it does, it would definitely be “the giant” piece, possibly the string quartet, and doubtful, probably NOT the rickenbacker section…which SOUNDS great (especially the distorted ricky bass line!), but wasn’t (necessarily) a great piece of music…

 

so “the giant’s causeway” went onto the shelf, however, since it was my very first piece (beyond playing a few synths) – proper piece – done with komplete – I was happy enough with it. I learned…

 

I will very, very probably attempt the piece again; I would retain the original part one, since it’s a live, take one, that is basically flawless, I would rebuild and expand the string section, and completely revamp the “prog trio” of drums, bass and mellotron/organ at the end. so – I am keeping the shelved demo as a reference…for now.

 

I then turned to an instrument that I was very, very curious about, “west africa” – I lived in east africa for four years, and learned to appreciate african music back then (especially congolese music) so having high quality samples of african instruments was a very exciting prospect to me.

 

I first constructed a “duet” of two koras; one, playing midi patterns emulating a rhythmic picking cycle, and another kora, where I played melodies “free hand” on top of the moving background. I did two takes, both of which I enjoy, but since I am not entirely happy with the melodic content on either (although the second take is actually quite good) I have also shelved those – and since then, much more recently, I sat down again with the kora duet template, and create a third piece, another kora duet, entitled “the heart of africa” – and this take, I think is quite decent – and I thoroughly enjoyed working with these amazing sounds.

 

I plan to practice on all of the west african instruments, and I hope to arrange more complex pieces of music involving west african drums, flutes and stringed instruments…a side project that will keep me busy for years! I would never have dreamed that I would have a sideline in african music one day – but I will, because I love african music, and the more I work on it, the better I will get at emulating it…

 

after the two shelved kora duets, which were followed very recently by the successful kora duet, I then turned to my first use of “multi” instruments, and, with the invaluable assistance of ken mistove, I eventually learned and understood how to create multiple instruments within a single instance of kontakt – and once I “got” that, I could sit down and attempt a full on piece of sampled music.

 

I randomly selected a preset “multi” instrument from the evolve mutations instrument, and it proceeded to load 12 instruments that created one of the most atmospheric, eerie “drum kits” I have ever heard.

 

it took a couple of tries, but eventually, I got a good quality drum track, and then I turned to the other instruments. a proper bass part was in order, so I loaded up the scarbee pre-bass (amped version) and got a nice, full bass sound – recorded a bass part to go with the drum part – and again, very impressed with the scarbee instruments, they seem to do a very good job of getting the authentic sound of classic instruments sampled to perfection – the “pre” bass (i.e. based on the classic fender precision bass guitar) is another one that is of the highest quality, as the scarbee rickenbacker bass samples are as well – Native Instruments has scooped up two fantastic bass instruments from scarbee, and it’s a great acquisition – I hope they adopt more scar-bee products, I really do.

 

finally, I worked at overlaying a section of grand piano, courtesy of the “george duke soul treasures” instrument, an absolutely stunning set of riffs recorded on grand piano, electric piano, organ and other keyboards – and all simply classic – great sounding samples!

 

in this case, I actually reached the maximum possible number of instrument that can be crammed into one “kontakt” session – so once again, familiar theme emerging…I abandoned the piece unfinished – again. in order to complete it, I will need to mix down the drums and bass together from the unfinished session, and move to a new session to overdub many george duke piano samples atop the pre-mixed (bounced) bass and drums – and at that moment, I didn’t feel like going through that process.

 

instead, I set it aside, and I moved on to my next test piece, my next “komplete” learning experience.   I wanted very much to try the “session horns”, so I built a short introductory piece, entitled “softly, softly we go”, which featured a group of horns, in a nice reverb room, with a “soft” instrument setting, playing a mock classical theme – a lovely sound, and as far as it goes – a good intro or lead-in piece to some larger production.

 

to follow the horn intro, I wanted a drum track, using the abbey road 60s drummer (because I wanted to learn how to compose drum tracks) so using this instrument, I built a nice long drum part, with various sections, and some fancy fills, and I have to say, although completely unadorned, it’s one of my best pieces yet.

 

finally, I sat down and re-made my kora duet, creating a much better backing track, and, hopefully, performing better melodic lead parts atop the pattern generator rhythms.   that, “the heart of africa”, and my unadorned abbey road 1960s drum part, is where I am right now with sampled instruments – and using kontakt to create drum parts, using the abbey road 60s drummer – could not have been easier – in short order, I had the process down, to where I could build an intelligent, varied and interesting drum part quite quickly – the whole thing took less than an hour.

 

but – the piece remains unfinished, again, I have kept two separate demos, one of “softly, softly we go” – my gentle, quiet horn intro – and another of the untitled-so- it’s-called “abbey road drums 1960s” aka “run into town – run 1” for reference, I hope to probably re-make the horn part, make it more concise, and create more space in it, and of course, I then need to decide what goes on top of my beautiful, recorded in abbey road studio no. 2 drums. sigh… (note: eventually, of course, a Rickenbacker bass part went on top of the drum part – and then, a host of live energy bow guitars…),

I also had an absolute blast doing a bass solo with the scarbee Rickenbacker bass instrument, “amber waves of grain” – over 10 minutes of sheer Rickenbacker tone.

another aspect of komplete 9 ultimate is the undeniable fact that it is making certain instruments and software, no longer useful, it is literally making them redundant – as komplete can do the job more easily, with better samples, with a mature GUI (kontakt) than earlier third party apps can, or, better than older hardware effects can L.

 

so in this case, for example, while I will probably install my old drum machine software, which is called “BFD2” (this was utilised heavily during the making of “gone native”), I will only do so, so I can see and use the drum kits / samples it contains – which I would use via kontakt within komplete – NOT through the much more difficult to learn, and use, BFD GUI.

 

in a way, I really don’t NEED BFD any more, because I have several sampled kits from abbey road studios, plus, I have “battery 4” and a few other percussion based instruments – there is functionality and samples far beyond what BFD offers. so as I say, I would still use their kits (which sound great) but not their interface J.

 

so, if I am honest, komplete has made the following software and hardware items redundant:

 

redundant software:

 

bfd2 drum machine software + sonar’s session drummer 3 drum machine software – replaced by:

 

  • damage (industrial and orchestral, cinematic drums and percussion)
  • battery 4 (massive drum machine / sample player, with many, many drum kits)
  • abbey road vintage drummer
  • abbey road 60s drummer
  • abbey road 70s drummer
  • abbey road 80s drummer
  • abbey road modern drummer
  • studio drummer
  • west africa
  • balinese gamelan
  • maschine drum selection

 

note: both bfd2 and session drummer 3 are still available to use, either by using their kits from komplete / kontact, or by using their own GUIs if desired – but, not sure I would ever use either again given the list above.

 

redundant hardware:

 

 

line 6 “x3 live” guitar effects pedalboard – replaced by: guitar rig 5 pro, plus, sampled guitars and basses:

 

  • guitar rig 5 pro
  • rammfire
  • scarbee rickenbacker bass
  • scarbee funk guitarist
  • scarbee mm-bass and mm-bass amped
  • scarbee pre-bass and pre-bass amped
  • scarbee jay-bass

 

 

 

“digitech” TSR24-S hardware 24 bit reverb unit – replaced by:

 

  • rc-48 reverb
  • rc-24 reverb
  • reflecktor high performance reverb effect
  • galbarnum breeze 2C reverb (reverb plug-in for SONAR) – additional reverb choice “outside” of komplete itself
  • all four of these reverbs can be “called” from within SONAR, so it’s very, very useful to have access to these high quality effects, even for improving content that was not created in komplete 🙂

 

plus

 

  • eventide “space” hardware reverb – this is part of a permanent installation of three hardware four hardware effects that sit at the “end” of my mixer output chain – so, the final stereo output of the mixer, goes directly to these four hardware plug ins, and THEN to the sound card.

 

I’ve learned over time, that certain effects sound best in “front” (so just after the guitar, as part of your mix, occupying two or three stereo pairs on the mixer) while other effects work best “after” the mixer (such as pitch units, delay units, and absolutely, reverb units).

 

so, reluctant as I am to do so, it’s probably time to retire the “digitech”, and rely on the three high quality reverb units within komplete 9 ultimate – as well as galbanum’s 2c “breeze” reverb software – which in itself, was and is probably a replacement for the ancient tired “digitech” rack mount 24 bit reverb, not to mention the eventide “space”, which again, in itself, is probably a replacement / improvement over the digitech.

 

In a perfect world, I’d love to just run everything, and in some respects, I have been doing so, I’ve certainly kept a number of hardware devices running that I have replaced several times over – so I have to bite the bullet now, and actually remove the older, noisier technology, and whether I will or not, it seems that software synths and software effects are gradually taking over my set up, which is actually not unwelcome, and I hope that this summer, when the studio is moving, I can re-arrange the studio to support a less-hardware dependent sonic environment.

 

Purchasing komplete 9 ultimate gives us a lot of that software, bleeding edge software synths and effects, awesome high quality samples, and other factors, such as the emergence of very sophisticated applications for the ipad tablet and also, for the PC. In future, I will probably end up using a very hybrid system, were some tracks are created on the ipad (and eventually, too, mastered and mixed – tools have emerged…), and then moved into komplete, and then mastered and mixed in SONAR and/or komplete and/or Adobe Audition (where I do a lot of my simpler mastering now). The fact that I can do these processes in multiple “places” gives us an enormous amount of choice, it’s absolutely fantastic what can be accomplished.

 

Other tracks would be created wholly on the PC, using PC software only to create, master, and mix them.   Still others would involve the use of “real” instruments, guitar, synthesizer, keyboard, kaoss pad, percussion, etc. which can be processed through software packages such as “guitar rig 5” and also, the studio quality effects within komplete 9 ultimate. The RC-24 and RC-48 reverb units are especially absolutely lovely, they sound great, and I am really enjoying them.

 

The appearance of a massive army of music applications on the apple ipad, has changed forever the way I make music. Over the past few months, I’ve been scoring classical, acoustic guitar, and alternative music using a notation application called “notion” – and I can see myself exporting tracks from notion, and then importing them into komplete, to add the highest quality sampled instruments to the basic instrumentation created by my original score on the ipad.

 

I will absolutely be using a combination of pieces:

 

  • music created wholly on the iPad (which WILL include guitar and loop work, not just synthesizers – thanks to some truly quality guitar applications such as BIAS, Ampkit+, and GuitarTone)

 

  • music created using the ipad and my guitar or guitar synth

 

 

  • music created entirely on the PC, not utilising any ipad applications, the kaoss pad, or any “physical instruments” such as guitar or bass

 

  • music created using the ipad, the korg kaossilator, my guitar or guitar synth, bass guitar, live keyboards courtesy of various software synths, and anything else I can throw into the mix

 

(I call this last one the “all instruments” set up – it allows me to use, in a completely live setting, guitar, keyboards, kaoss pad, ipad, and of course, a lot of effects units, including loopers). The looper captures the live performance, and the output of the looper is optionally run through the pitch pedal, the delay, and the reverb (my standard set of output live hardware effects pedals), and finally recorded in SONAR.

 

The arrival of application-based music meant that my record-keeping was really thrown askew, because you can create so much amazing music so quickly with applications, I realised early on, I would need a special forum to create them in, so before things got out of hand, I split my recorded music collection into two distinct areas:

 

Music Dave Stafford – the traditional home of most traditional recordings, anything involving real guitars, real basses, real keyboards, and looping thereof – which may also include the occasional ipad or kaoss pad in a guest starring role – they are not banned, it’s just this is the home of more traditional instrumentation.

 

App-Based Dave Stafford – there is a folder for each app, containing both sessions and finished product, I am so glad I did this now, because now whenever I complete any piece in an app, I have a specific place to store it, from which to upload to Bandcamp, or Soundcloud, or to my website – or for whatever purpose I need it for.

 

This means that any very hybrid music, that crosses over between these two broad categories, I’ve chosen to move that kind of music into the “Music Dave Stafford” folder, because it contains the real instruments, which is really the main characteristic of the music in this folder – the presence of real instruments, played in real time or looped.

 

The arrangement is working well so far, I am not surprised by how many app folders I already have, and as time goes on, there will just be more and more, but I think that’s brilliant – and the emergence of more and more sophisticated application music creation tools, is almost irreversibly moving me more towards app-based music – my next eternal album is focussed on one of my more recent app acquisitions – the iVCS3 , a perfect replica of the 1969 beast of a synth that powered the sound of early roxy music and early king crimson – one of the first truly sophisticated modular synths, and the application version is uncanny for it’s realism – it’s a fantastic, primitive, visceral, wonderful device that spits and fires, drones and warbles, and has a fantastic set of pre-sets, too – including the famous never-ending synth pattern of the Who’s “Baba O’Riley” – and it’s very, very odd to hear that playing on your ipad, from an emulation of the device it was originally created on!   The makers have included the Who session as a preset – amazing!

 

I’ve been playing the iVCS3 recently, and I have recorded a number of tracks, which while not quite ambient, I am happy enough to give them the name “drones” – so, some elements of ambient, then, but, some other, harsher elements too.

 

I believe I recorded about a dozen tracks, a few of which turned out to be somewhat substandard (clearly a beginner with the device, you can’t win them all!) but I believe that about eight tracks have survived and are some cracking representations of what this amazing synthesizer is capable of. I’ve mastered three of the tracks, and I hope to work on the rest this weekend, with a view to get the album posted before Monday – that’s my hope, difficult to say if I really will make that date – I shall try.

 

The pieces recorded are simply remarkable, no thanks to me, my involvement is minimal, but, I did need to be involved, it’s strange, in that when you “play” the iVCS3, you don’t often really use the keys, you more often use the knobs to create variation of a running theme. I was very intent on getting some excellent tracks out of the device, so I very, very carefully and very gingerly turned knobs, until I understood what each one did…and then I felt free enough to really experiment, so I really branched out on the last few numbers, which were all longer-running pieces, one of them extending to over ten minutes.

 

So I have momentarily, turned away from working with komplete, but that’ not to say I have stopped, in any way – it’s my intent to work with komplete as much as my schedule with allow me – and my first goal, is to take a complete bass and drum track, that I did a lot of work on, and see if I can create a proggy version of it, complete with precision prog guitaring – that is my goal for this piece. So komplete is waiting for me, and as soon as I get back to it, you can expect a slow but constant stream of music, of many, many kinds and styles, to be built with the remarkable toolset available within komplete 9 ultimate – an awe-inspiring piece of music software that if you had told me about it 20 years ago, I would not have believed you, I would have said it was impossible for such a thing to exist, on a computer…

 

But – exist it does – and we really wanted to step up a bit, and have the capacity and ability to create a much, much broader range of sounds than we previously had available – and the nine synths and the many, many sampled instruments within Komplete, gives us just that! And – the future – there are many amazing instruments available that will run in Kontakt, so we do plan to pick up some of them over time – the first acquisition will be a very special tool, meant to bolster the ambient sampling capability of the studio – soniccouture’s remarkable “geosonics” instrument.

 

This remarkable third-party instrument, which runs in kontakt without issue, manufactured by soniccouture, is comprised of four different musical “sections”, each one representing a season, and many of the sounds have been sampled from nature, all over the world, and compiled into this unique instrument – and some of the “combinations” of sounds they have created are truly remarkable. So I have “geosonics” on my wish list…and I also have a large number of other third party instruments that I would love to add to my sample player set up 🙂

 

In any case, I cannot recommend native instruments highly enough; who have patiently worked on kontakt, reaktor, and all the instruments that plug into them; and Guitar Rig, one of the most amazing software guitar processing packages I have ever seen –and their choice of subcontractors, i.e. companies that have created unique and very special instruments, which native instruments have added to their product offering to make it more attractive. That includes but is not necessarily limited to Soniccouture (whose “gamelan” instrument is included in komplete 9 ultimate – one of my favourite instruments so far – have a listen to my gamelan-created track “bird of paradise”), Scarbee, who make the amazing “rickenbacker bass” instrument (and several other bass and guitar emulations, too!) – which you can hear on “run into town – run 1” or “run into town – run 2”– that thing is just so amazing sounding, completely authentic, and when you couple it with a high quality sampled drum track, it sounds completely real – because of course, it IS completely real.

 

That…is the beauty of sampled instruments. They are real ! Therefore…they SOUND real.   Which is a good thing 🙂