studio diary 20170705

well somehow time has really gotten away from me, and I’ve not managed to write a blog for a couple of months now.  I have an excuse (of course):  I’ve been busy.  Mainly, working on the new pedalboards and guitar system (more on that shortly) but also, still trying to “keep my hand in” by working on music in the form of a very, very large collection of new tunes created in Garage Band.  I would venture to say that over the past few months, GB became a bit of an obsession, to the point where my iPhone overfloweth with Garage Band songs and drafts, sometimes, just one or two versions, sometimes, six or seven if a particular song needs a lot of detailed work.

the net result of that, is that actually, both my phone and my favourite tablet, are currently overflowing, and later today, I will be offloading completed tracks, and also, completing incomplete tracks and then offloading them, and then, making sure I have final mixes of all unpublished tracks…so that finally, I can master them and upload them. Normally, this would be a handful of tracks, but if I am not mistaken (and this number might not be exact) at the moment, I have no less than 16 NEW Garage Band tracks to sort out and add to my Garage Band Eternal Album on Bandcamp.

Sixteen new tracks!  Now – I have been working pretty exclusively in Garage Band over the past several months, and not working so much with real instruments, etc. in the studio – and that is because when I have had time to work in the studio – I have had to dedicate that to working on the guitar system and pedal boards (plural).  Those have now grown to four in total, and in fact, just yesterday, I worked out a brilliant new system, for accessing the different sounds – I am using a very simple device, a “pan pedal” which is made by Ernie Ball, to allow me to “move” between my main studio set up (which currently is comprised of two pedalboards, which I call “Pedalboard 1” and “Pedalboard 2” (imaginative names, I know) and a third board, which, surprisingly, is named “Pedalboard 3”.  So I can be playing one sound via PB1/PB2 (which are currently chained together) and then I can “switch” over to take a solo on PB3 where a completely different sound is waiting patiently for me.

Having the pan pedal, also means I can “blend” the two sounds – and hearing that, you can get some amazing “stacked” guitar tones – because for the first time, I am actually running two complete stereo set-ups, through two separate guitar systems – and, I have the output of PB1/PB2 going to the board direct, while the output of PB3, is miked with two Shure SM-57 instrument microphones, and those are going direct to the sound card. This then means when I record, I can record two tracks of the direct sound on PB1/PB2 and two tracks of the miked sound of PB3 on two OTHER tracks which means I will then be free to mix and match however I want – using as much (or as little) of each of the two completely different-sounding stereo feeds.

I haven’t yet mentioned the fourth pedalboard – it has an incredibly imaginative name, which you will probably never guess – Pedalboard 4.  But – it does have a distinct sub-title, unlike the other three – it’s the Guitar Synth board.  It’s quite simplistic, but it is a viable very different sound source, and it can be easily chained to PB3 or otherwise incorporated into the mix since it’s also tied directly to the mixer.  So the Guitar Synth library of sounds is also readily available now – directly out of the mixing board.

Also – with just a very quick change of cables – I can re-route the pan pedal to move between PB1/2, and PB4, or, back to PB3, or if I really wanted – I could have it pan between PB1/2 and PB3/4 chained together.  Talk about sounds…that would be a lot of sounds.  Right now, I am pretty happy with my PB1/PB2 combination, panning to the little PB3 board which is great for distorted soloing.

Getting all of that set up and working, and finalised (for the moment, of course, until I change my mind again, or, more likely, until I think of a “better way” to do things) has taken up the last several months’ time, meaning that I have not had time to work with real instruments in the real studio, except to test sounds and boards – and I’ve been doing a lot of that.  I have successfully re-programmed my Ground Control MIDI controller with 200 awesome sound combinations, and successfully done a sysex backup of that new set of sounds.  So that challenge was finally sorted out after quite a bit of trouble…I have, however, finally cracked MIDI Sysex – which for a long time, was a mystery to me – no more, now, I know how to backup, and restore, the entire contents of my Ground Control…it’s fairly easy to do, if you are patient.

I do have one other aspiration, which I actually got this idea from Vernon Reid (a great source of guitar ideas – he has helped Eventide with a lot of their distortion algorithms – so I offer up my thanks to Vernon wherever he is!), which is to stop doing ALL of my effects in series, and do them in parallel (to be honest, I also remember the late, great Allan Holdsworth, describing the same idea in a guitar workshop) – running effects in parallel.  Vernon has discovered a nice little DOD Resistance Mixer (the model AC-240, to be exact) which allows you to run four in to one out, and he uses a few of these in his live set-up (which I saw on YouTube, of course!).  It’s brilliant, and I do plan to look into that when time permits.  For the moment, out of necessity more than choice, I am doing it “old school” – in series.  Given that I am running a lot of hardware in series, it actually is all sounding very, very good now.

Note:  later on this year, we are going to see Living Colour play live in a Glasgow venue, so I can’t wait for that – one of my guitar heroes – Vernon Reid, I will finally get to see and hear Vernon play – I can’t wait!  A great and greatly under-appreciated band, Living Colour.  One of my personal favourites…it”s going to be amazing. I am very excited about this concert!!

Anyway – based on the work I’ve been doing, I have decided that once I finished processing the outstanding 15 or 16 Garage Band tracks (which I plan to begin work on this afternoon) that I will no longer spend as much time working in Garage Band, or, if I do, it will be probably for ambient projects, rather than my endless exploration of Apple Loops mixed with “real” content i.e. bass parts “played” by myself, and instead, go back to working on real music with real instruments – primarily, the electric guitar.

I think that my obsession with Garage Band has finally run its course, but, the result of it is an already very interesting catalogue of music, but, once I mix and master the next 16 tracks of completed Garage Band music – it will become apparent what a brilliant tool it has become for music creation.  It is pretty amazing what you can do with it, and I’ve been working more with matching tracks up pitch-wise and timing wise, so, matching a “real” bass part to an Apple loop, for example, or pitching different tracks to fit better with other tracks.

It’s amazing how well it all works, and, I have had an absolute blast creatively, it is endlessly fascinating to me what you can do with a stack of pre-made loops and a little bit of crafty bass playing.  I’ve found that to be key in most of the compositions I have worked on – I might create an entire piece out of Apple loops, but then, to humanise it, I play a “real” bass part – and that does it, that suddenly makes the track “pop” – it’s weird.

For a while, another technique I would use, would be to have the first two thirds of each piece, be entirely artificial; all made from loops, and then suddenly, during the last third or quarter of the piece, bring in a “real bass” part and the effect is really dramatic – it really makes the tracks sound so much better, even if there is already a synth bass or whatever – having that wonderful, plain, “Paul McCartney” bass there makes the tracks irresistible.

I have spent a ridiculous amount of time perfecting some of those bass parts – which are often played on the fly in one take, and then close-edited later to sharpen them up – taking a wild, on-the-fly live performance, and custom-fitting it to the existing song.  It’s a lot of work – but it’s so, so worth it, because it just brings the pieces full circle, and the artificiality that the loops create, gets seriously negated by the humanness of the Paul McCartney plays as “played” by yours truly.

So when you finally get to hear the next 16 Garage Band uploads from me – please listen especially to the bass guitars – because I have indeed, worked really hard on those bass parts – which you will find in most all (but not all) of my Garage Band work.

I should also mention the other “star” of the Garage Band tracks, which is the Korg IWorkstation synthesizer, with it’s two dozen different sets of presets – if you search long enough, you can always find the perfect sound, and since Garage Band’s Inter-App Audio is so well implemented, it’s easy to bring in a powerful synth like the “iWavestation”, and I use it extensively, on multiple tracks, on almost all of my Garage Band material.  So those are my two secret weapons, really:

  1. Apple’s “Paul McCartney” bass, in “Note” mode, which I play like a real bass, then close edit later to “perfect” the bass part
  2. Via Inter-App Audio, I call up the “Korg iWavestation” synthesizer which can provide an absolutely astonishing universe of sounds from any kind of synth sound; any kind of beautiful, spacious pad sound, to drums, basses, whistles, you name it, it’s in there – one of Korg‘s most amazing products, ever.  It has become my “go-to” synth whenever I am recording in an app that offers IIA connectivity – the first thing I do, is bring in an instance or ten or the iWavestation – I cannot recommend it highly enough, it’s a great synth and workstation, too – absolutely amazing and sounds great.

The third and uncredited star, is of course, those amazing Apple Loops – without them, none of this amazing catalogue of work would exist, and I can’t believe how this incredibly diverse set of music, where every piece is completely different, where each time, I try to find a new approach, a new sound, to make it utterly unique, and, importantly, different from the last piece I did – and if you are doing this across dozens of tracks, you end up with a diversity of music that is almost indefinable – I could literally, not describe the different genres, types, feelings, grooves, systems, concepts – I just can’t, the only way to describe it is to say, go to the Garage Band Eternal Album, and listen to it from start to finish – and then try to describe in words what you just heard.

And when I add in the next 16, which feature some of the most diverse and weirdest, most out-there compositions so far – that will make the above experiment even more interesting.  If I were to continue with this, the madness of being addicted to Garage Band might send me right over the edge – I don’t know.

I am going to take a break, I am extremely happy with both the catalogue “so far” (note, as of this point in time, 20170705, the Garage Band Eternal Album contains 24 unique tracks) or to date, as well as, I am very excited about the next 16 tracks – which will close out the catalogue in the short term (bringing the total number of tracks to about 40 – which in itself, is amazing), because I am (with some difficulty, I admit) going to slow down or stop producing so very much Garage Band material, and return to working on real songs with real guitars and keyboards, and I am going to give the amazing, easy to use, fun to use, Garage Band – a well-earned rest.  Because if I am honest, I have spent altogether too much time working on Garage Band songs, and not giving my other musical outlets a chance!  Of course – that wasn’t intentional, they weren’t ready – but, now they ARE ready – so – I am ready.

 

It’s also my hope, to return to making ambient music, and in particular, ambient music made with applications.  I still have unexplored areas that utilise ambient tools that I have had for many years, as well as some newer apps that I also have not spent enough time with – so I hope to rectify that situation, and in the process, hopefully, add some new ambient tracks to some of the catalogues / eternal albums up there on Bandcamp.

 

I am hoping I have reached, or nearly reached, the “cut-off” point, where the total obsession with Garage Band ends, and a new practice of music-making begins, which involves using real guitars and my new pedalboards and guitar systems plural.  That is the idea, anyway – and that is why I have also spent the last several months trying to get everything ready for this day – and after extensive testing, and spending a lot of time creating 200 amazing and beautiful guitar sounds in my Ground Control Pro MIDI Controller – finally, everything is ready, and I have now, at my fingertips, a huge and diverse array of guitar sounds that I can use in my new compositions!  It was a lot of work to get to this point, and I am beyond pleased with the way my guitar is sounding – and that is not something I’ve said very often in my life.

Of course, Komplete will still be there to play it’s part, since I don’t have the space for a physical drum kit, and, I’ve never had the opportunity / chance / space / time to learn how to play a real drum kit – I still depend on Komplete to help me set up my real guitars-based tracks – mostly, with the drum tracks.  I also, often, will use Komplete to do basses – and certainly, I use it for keyboards and synths, along with other softwares like the M-Tron Pro mellotron software.

When the urge takes me, I do sometimes play real bass instead of Komplete’s bass, but using Komplete is truly tempting because it does contain toolsets like Scarbee’s amazing Rickenbacker bass samples, and I just can’t resist having the sound of a Rickenbacker or a Fender Jazz bass or a Fender Precision on my tracks – I love those basses, and being able to “Play” them, even via a MIDI keyboard – is heaven.  My cheap throwaway bass cannot compete with those sampled basses for tone – it was so cheap, that I actually paid nothing for it – a good friend of mine, and an amazing musician, too, Michael Dawson, actually gifted that bass to me – which I have subsequently used on certain tracks, one of which was the tribute to the late John Wetton – “Wettonizer” is the one main track I remember using the “free” Washburn bass on.  It is actually, a lot of fun to play (it’s tiny, and I am not!), so maybe I will add in some “real basses” as well as using the amazing Rickenbacker and Fender samples available via Scarbee via Komplete.

In essence, in the studio, Komplete is my “band” – they come up with the bass and drum tracks, and if needed, keyboard and synth tracks – and then, I am left to play real guitars on top of those created tracks.  It’s as close as I can get to having a real band to play with at the moment – and again, I don’t have the space available for a real band anyway, so at the moment, the Komplete “band” does me more than proud – and you can hear exactly how well they do, by listening to a couple of my larger works, where they are heavily featured – in particular, on “the complete unknown” “planet obelisk” and “day seventeen” – these are examples of the full Komplete band – drums, bass, keyboards – supporting me, the man of many guitar parts :-).  It takes weeks or months to get the drums, basses and keys in place on tracks like these, and it’s not uncommon that three months might pass, before I get to play a single note on the guitar.

(Note: all of the tracks noted above, are all taken from the dave stafford “progressive rock” eternal album – please have a listen on Bandcamp).

 

Of course, it does take time, creating drum tracks, and bass tracks, and keyboards and synths – but it’s worth the time, because I want the best possible backdrop for guitars – and with Komplete, I get the best there is.  For example, depending on what kind of era I want to emulate, I tend to use the Abbey Road drum kits, and I can choose from a vintage 50s kit, a 1960s kit, a 70s kit, 80s, kit or “modern” kit – and each one has it’s own character and options, and they sound absolutely amazing – so I tend to mostly use those, although there are many, many other drum options within Komplete…Abbey Road drums are my current favourite, and they can be heard on a lot of my works.

I have also favoured the Scarbee Rickenbacker bass, using different pickups and presets, for a lot of my pieces, and I think Scarbee is an absolutely amazing company, the care with which they create their instruments is exquisite – the details are absolutely stunning.  I can get so many amazing tones out of that Rickenbacker bass, I could just about not ever use any other – except of course, when I do need a Fender bass for a deeper, more traditional sound – and then, I turn to Scarbee once again – and in many cases, they even offer an “amped” version – so you can have just the bass, or, the bass sampled through amps – it’s amazing – I am totally spoiled for choice.

After a lot of hard work, especially the programming of 200 custom preset guitar “sounds” on the Ground Control Pro, I am ready to play some serious guitar – but, serious guitar with the best tones possible.  I have really chosen a bit of a strange path, over the years, I have mostly stayed away from “guitar amps”, instead, using a plain power amp, and asking either software, or, my pedalboards, to be the main source of “tone”.  Now I am in a hybrid set up – I am using an amp, or actually, two amps – one is a solid state guitar amp, which has a line out to the mixer, and the other is my plain power amp, where I am miking my two 1X12 guitar cabs direct to the sound card.  The “tone”, however, is the tone of whatever guitar I am playing, plus, what sound colourations are available from the pedalboards – which of course, include the many-faceted Eventide H9s – each of which contains a massive library of absolutely astonishing, high-quality sounds.

When I think about what is possible with just the H9s (ignoring all other pedals for the moment) I kinda wish I had more than 200 slots in my MIDI pedal, but the truth is, by combining different H9 algorithms, the number of possible insanely good guitar sounds, is not just 200, or even 2000, it’s probably more like 200,000.  Seriously – and, Eventide keeps adding in new algorithms, too, which just increases, exponentially, the possibilities, to basically, limitless – the latest new algorithm, “Pitchfuzz”, contains some amazing new distorted and / or pitch-shifted sounds, which are out of this world, and, of course, I have incorporated the best of those into my 200 presets.  Using the H9s in multiples, makes it possible to create combinations of effects that are truly lush and incredible sounding – you have to hear them to believe them.  Exquisite combinations of beautiful, individual sounds…

I did spend a bit of extra time on one particular sound that I truly love, and I got this idea straight from Allan Holdsworth (may he rest in peace) – on the first of several occasions where I was privileged to see Allan play guitar, he had this amazing “swell” sound, where while the bass and drums played a kind of “drone”, he would “fade in” or “swell” these beautiful, clean chords, which were drenched in layers of delay and reverb – and I never forgot how beautiful that sounded live.

During the Bindlestiff years, I even tried to emulate that sound, by fading the sound in manually with a volume pedal, into a huge reverb “room” – close, but not quite.  But now – in the land of H9s – I can have auto-swell, at any time setting I want, and it’s brilliant.

I took this opportunity to create some special Dave Stafford auto-swell settings; starting with a short auto-swell (1900 milliseconds), then, medium (3100 ms) and finally, the “Allan Holdsworth” series of auto-swell (my “long” swell at 4000 ms or 4 seconds) – and I made several variations of that basic sound, running the swell through various different Eventide Space reverb sounds, and in one final example, through a beautiful Eventide delay and then into a beautiful Eventide Space sound.  The result is a mini-bank of amazing “swell” variations, and I am so glad I took the time to work out the programming for those sounds – taking care of details like that, gives me an edge, it gives me something unusual, not stock – but with my own personality – these 200 sounds are Dave Stafford Guitar Sounds, regardless of whether they are “stock” or “custom” – they are my choices and juxtapositions – and it’s so nice to have such an amazing library of “algorithm meets algorithm” possibilities.

This afternoon, then, will be dedicated to downloading (and, clearing off, thank god) the 16 new Garage Band pieces, trying to first get the final mixes just right, then, the mastering, and finally, probably starting in a few days’ time, uploading them – and once uploaded, the Garage Band Eternal Album will have reached about 40 unique Dave Stafford compositions done over a relatively short period of time – months – but, in terms of sound, and quality – it’s a huge, huge sound – and, a catalogue of which I am both very proud and very fond of – I have really enjoyed my “time of Garage Band”.

You should try it – drop everything else for a while, and just create with Garage Band – a piece every couple of days was usually my method, although some of the more complex pieces might then stretch out to a week or two until I was happy with the final version – and then, immediately, start another one – preferably, something that sounded COMPLETELY different to the piece just completed.

In a week or two at most, you will be able to hear all 40 tracks, and these should give you a good glimpse (at least) – if not an amazing view – of what this creative and innovative Apple tool – one of the oldest “computer-based” music making tools (now, mobilised on the iPhone and iPad, of course – in the Apple way) can do; and, with it’s latest updates, it has become one of the most fertile, stable, and unique grounds for growing musical ideas.

Anyone can have a go – drag some Apple loops into your song, and you are away – dream up any kind of music you like.  Just do loops if you don’t want to play, or don’t know how – you can still create, using the magical Apple loops, if you do play an instrument, then you have the opportunity to add in some keyboard based or drum or bass content of your own.  It’s easy to learn, and endlessly expandable, you can add many, many bars and create very long pieces, or create three minute pop masterpieces – it’s all there with Garage Band.

 

And now – to mix, download, master and start getting those new tracks uploaded – I can’t wait !!!

 

 

peace and love

 

dave 🙂

 

 

 

 

 

 

 

 

 

 

the stupidest policy in the universe

 

RECOGNISING STUPIDITY WHEN I COME ACROSS IT

like my late father before me, I find that there are certain aspects of life that are just so stupid, that you can’t help but become agitated and very outspoken when one of these “stupidities” comes to light.

I actually have a real knack for recognising stupid issues, and that realisation came home to me in a quite surreal experience I had at a Guitar Craft course held in Ojai, California back in the 1990s. It was a very good course, with mostly good weather, and we got to listen to Robert Fripp rehearse his Soundscapes, not to mention hearing an early DAT of the then non-existent King Crimson album “Vrooom”, which of course preceeded the album “proper” which is the even more awesome “THRAK”.

but i digress, the incident that confirmed to me that I do have a real knack or propensity, if you will, for seeing stupidity for what it is, and usually, confronting it head on….started like this:

A GUITAR CRAFT STORY

The course was in a lovely, big house on a lovely big green hilltop, a grassy hilltop lawn that of couse, being in California, was fully equipped with sprinklers, which went off automatically at pre-set intervals, to keep that hilltop lawn watered and healthy and looking good.  That is absolutely standard practice in southern California, because, if you don’t water…your lawn, and / or your plants, turn brown and then die.  California, after all, is basically, an artificially-irrigated desert, with water piped in from other states! – from many hundreds of miles away.

part way through the course, on a rare rainy day, where it was raining pretty hard, but in that warm kind of unconvincing California way…   I believe it was just before lunch, and the whole group, including Robert were sitting in silence (as you do quite often at Guitar Craft) and of course, if you are not quiet inwardly (as I often wasn’t) your attention may start to wander, and I confess that at this point, where a long, uneasy silence was waiting to hopefully, become a proper silence…I was looking out the window, watching the rain and looking  at the plants and the lawn.

the silence went on and on, and after an uncomfortably long time, suddenly, Robert spoke: “can anyone” (he said, addressing the entire course) “give me an example of real stupidity that is going on here, right now” and he sort of, gazed up and around the room.

confused silence was the first response, while people tried to think if perhaps, THEY had done something stupid earlier on, and now here was Robert Fripp calling them out?  You could sense some rising panic in some of the faces…but no one answered.

then, the answer smacked me right in the brain, that Stafford tradition (my Dad would have been so proud of me!!!!) came back and I blurted out “the sprinklers”.  “The sprinklers are on, watering, while its pouring with rain”. I added.

“Thats right, the sprinklers” Robert agreed.

And of course, thats pretty much the only time that I had the answer when the gathered elders of Guitar Craft did not, so I was pleased that I’d seen it so quickly.  And no one except Robert had a clue, it is just one of those things that people born in California, are used to seeing, all the time, all of your life.

And, it IS a pretty stupid thing, to have your sprinklers busily overwatering your lawn, and indeed, the combination of a substantial rainfall and the powerful large radius-coverage sprinklers running at the same time, could and often did turn your lawn into a green soaking wet sludge –  serious over watering can occur.

I have told this story before, in a more abbreviated form, and I apologise if you have heard it before – but it was necessary for me to restate my “credentials” as a more than “averagely aware of stupidity” kind of person.  I see stupidity in many designs, processes, and even in well establish practices, where people are doing activities in a particularly stupid way, when a much better way is or at least, might be available.

for example – sprinkler systems that can be overridden and can be programmed NOT to turn on, in the case of rain.

clearly, the owner of that nice house on the hill in Ojai, was unaware of this possibility, and because of that, would be always overwatering his lawn and plants when the sprinklers regularly came on while it was raining!

Stupidity at work, in the universe…a perfect example, and both Robert Fripp and I, while looking out the window at the garden in the pouring rain, had realised what was going on just outside the room, while the other fifty five people were only thinking inside the room, or, hadn’t noticed  or, hadn’t realised – that a really stupid thing was going on, right then and there – but outside, not inside!

It’s a day I’ve never forgotten, not only because I knew the answer when RF was the only other person who did, but because it was a great course, and my “Stupidity Detector” was clearly working better than it ever had done before.  A very useful tool, being able to recognise stupidity when you see it – and, if you look around, you will often find that its … EVERYWHERE!!

So what does this long and somewhat tedious Guitar Craft story have to do with today’s blog?  Not a lot, really, except perhaps, to establish that I have this knack, this ability to spot stupid practices, and that, coupled with some forty years in the business world, makes me the Customer From Hell, when companies have to deal with me.

THE ISSUE IN QUESTION

Today’s blog, however, is not about a gentle, somewhat forgivable stupidity such as watering your lawn while its raining…no, today’s blog is about something much, much stupider than that – and therefore, a hundred times more irritating because the stupidity actually has a real, negative effect on you.

I am writing today about a very specific “policy” that a particular music store has, which is, in short:  supplying the wrong type of power supply with almost every guitar effects unit they sell: a European power supply with round pins that cannot be plugged into the wall in the UK! (where we use flat pin power supplies only). To me, this “policy”…is right up there on my “stupidity radar” – supplying a useless power supply that could only work in Europe…in the UK.

a) it is a policy that makes NO logical sense – and the stream of useless Euro power supplies arriving every few months – utterly useless

b) I am sick and tired of ARGUING about it each time I make a purchase – and, an important point here – having to ask in the first place is bang out of order – when it SHOULD HAVE BEEN in the box when it arrived!!

Life is literally too short for me to waste my time railing against such a stupid thing – and they, unwilling to do as I, the customer politely asks again and again – well, the most recent sale they made to me – will be the last bit of business they get from me…I need vendors that will work with me on this.

Not, fight me tooth and nail when I try to get a useable power supply for my effects unit – that I have already paid for (it is part of the effect units’ purchase price)

Meanwhile, I have grown so frustrated with this “policy” over the past six or seven years (!!!!!!!) that I have recently reached the point where I told them that, if they were unwilling to continue to make the situation right, each time I make a purchase of an effects pedal from them (containing a European supply), that they will no longer get my repeat business or any of my business, because I refuse to participate in this specific power supply stupidity any more!

ANALOGY

I’d like now, to ask you a few simple rhetorical questions:

Note: today’s “stupidity” only occurs in the United Kingdom to my knowledge.  It does not occur in Europe or elsewhere that I know of.  This is important to remember.

 

So – UK residents only, then – when you buy a new toaster (or any small appliance) do you expect it to have a UK style plug (flat blades, three pronged) attached, so you can plug it in the moment you get home, and have some nice toast with your cuppa tea?

when you buy a new iron, do you expect it to have a UK style plug attached, the correct flat-bladed UK style plug, so that when you get home, you can plug that iron in right awaty, and get your three week backlog of ironing done in a jiffy?

when you buy a new hair dryer, do you expect to be able to plug it into the wall, and dry your soaking wet hair right away, without waiting?

when you buy a new alarm clock, do you expect a UK style plug attached right to it, so you can plug it in straight away, set the alarm, and then get woken up ever so gently to the quiet strains of Rammstein’s “Zwitters” blasting out at 6:05 a.m., at volume 10…?

when you buy a new Hoover, you expect it to have its UK style flat bladed plug already attached, so when you get home, you can plug it in straight away, and hoover your dirty ole carpets to yer heart’s content?

If you got a new set of hair straighteners, you would definitely want to go hone and plug them straight into your UK 230 volt wall outlet, so you can then wait for them to heat up, and straighten your hair to PERFECTION??

Let’s go large now, you finally bought that brand new washing machine you wanted, and I just know you will expect that it will come with a UK style plug already attached, so you can plug it straight into the wall outlet, hook up the water, and wash all those dirty clothes that have piled up everywhere??

I think you can see the everyday truth in the above statements.  Nothing tricky about them – just ordinary appliance purchases and expectations.

 

You may have gathered that I am making a point, and I am, and yes, OK I have rather belaboured that point (apologies)…but there is a reason for the many, many examples of ordinary electrical appliances both small and large – so that we can establish that for any electrical item that you buy in the United Kingdom, you have developed the perfectly reasonable expectation that the moment you get it home, whatever it is – you can plug it in, and start using it immediately.

however.

What if that were NOT the case? What if, you brought that toaster home, and it didn’t have a UK plug on it, or with it, so you couldn’t plug it into your common, ordinary, garden UK 230v outlet – in fact – you couldn’t plug it in anywhere in the UK.

First of all – that would make you feel very frustrated, because, you couldn’t feed that horde of screaming children waiting for their morning toast.  You would all starve, or at least you’d be eating untoasted bread which is almost as bad – when you want toast. and it goes on for days and days and days – no toast, and a useless, cold toaster.

That scenario is pretty unpleasant, but let me take this story one step further.  Let’s say that on that same day, the day you got home, took that toaster out of the box, and THEN realised that you couldn’t plug it in…that you rang up the store you bought it from, and asked them to please provide a proper UK plug, and they said, yeah, OK we’ll do that, you will get it in a couple of days.

Three days go by, with no toast made, that toaster not lighting up at all.  The toaster is dead.  The promised UK plug does NOT arrive.  You ring the store again, they say they will send the plug…so now three weeks have gone by and you still have no working toaster and no plug from the store…

After many calls, much argument with the store, pleading, cajoling…You reach the three month mark…THREE MONTHS WITHOUT TOAST…and finally, you get a UK style plug for your toaster delivered, finally sent by the store at long, long last.

And if the children haven’t all starved by now, they finally get some toast – but you’ve been through three months of hell trying to get the store to make things right for you, and you really begin to question your sanity.  You have argued calmly that it should have had a UK plug all along, but, the store seem unconcerned, and they also seem bent on supplying the NEXT item you buy from them…with ANOTHER useless Euro style plug.  Repeat of same scenario above.

Now, I could build a similar scenario for each and every item above, but it would take far too long, and I think the toaster example is a good enough example.

Three months without being able to plug in your new toaster?  Can you imagine?

 

Now – with the above everyday analogies, I’ve set up the background here, I’ve created practical examples of how it would feel if you got home to find that you could not plug your new toaster in, and then, the store you got this rather useless appliance from, took over three months to make it possible for you to plug it in and finally have some toast.

How would that make you feel?

 

IT’S BEEN MY EXPERIENCE…THAT WHEN THE ROW GETS SERIOUS…

A CERTAIN SILENCE WILL FALL.

 

How would that make you feel??

 

Now – that is a question.

Unfortunately, I can answer that question. I can provide in fact, a first hand account of exactly this “toaster experience” but with something else in the way of “small electrics” that I regularly purchase: effects pedals for guitar.

For the past several years, I’ve been purchasing the odd guitar pedal or two, and often from one of my favourite stores, DV24/7.  They were, and are, a good store – they delivered quickly, they always had the lowest price, and eventually, they got all of my business.

Until a few days ago, when I reached such a point of impatience and sheer frustration with their attitude regarding the power supplies for said guitar effects – that I’ve told them that I will be taking my business, my REPEAT business, to another guitar store.  ANY OTHER STORE. One that will truly want AND truly appreciate (not just say that they appreciate, but ACTUALLY appreciate) my repeat business. GAK, Dolphin, I really do not care. Just – no more Euro power supplies.  Please.

 

I must have at least six of these useless Lumps Of Plastic with round pins sticking out of them, cluttering up my storage area at home. They are worthless in the UK, sadly, they would be quite handy for any number of young guitarists in Europe.  I have enough for a whole Euro power pedalboard.  In Europe.  Where I don’t live.

They are doing me not one whit of good unless you think it’s perhaps, a good reminder from myself to myself to say NEVER AGAIN to accepting a Euro style power supply for any UK-purchase / UK-use electrical appliance or guitar effect pedal.  Ever.

 

DV24/7 refused to listen to the pure logic I presented to them regarding this very, very stupid “policy” of theirs – which is this:

Each effects unit they sell IN THE UNITED KINGDOM, comes supplied with a power supply (as intended by the manufacturers – who meant for the correct-country power supply to come with each pedal, it is included in the PURCHASE PRICE!) but with a twist; its a EUROPEAN power supply that DV24/7 regularly send to their UK CUSTOMERS.  That cannot be plugged into ANY power outlet IN THE UNITED KINGDOM.  Now – where, exactly, is the logic or sense in THAT?

Answer?  There is no logic present in this odd policy of supplying useless / wrong power supplies with each effects pedal sale.  If I just shelled out £400.00 for a really nifty pedal, it had darn well come with the CORRECT, USEFUL POWER SUPPLY.  That will plug into one of the many UK OUTLETS that I have in my UK HOUSE.

TALK ABOUT SPOILING YOUR ENJOYMENT!

So,  you’ve finally decided to buy your first Eventide H9, a truly powerful and exciting new guitar effects device – you order it from DV24/7; it arrives in a day or two..

but…BUT…it comes supplied with a EUROPEAN power supply.  So all that anticipation, all the excitement – dies, because you cannot PLUG IT IN.  So you then get to LOOK at it, but not use it, or hear it, for several days or even weeks, while you impatiently wait for the store to send you the right, usable power supply. After the fact, after the purchase….”oh please, kind sir, may I have a UK power supply so I csn actually USE my guitar effect??”.

 

Now, the first few times this happened, I would just ring or email them , and say “can you please send me a UK power supply for this REALLY EXPENSIVE pedal i just bought from you?”.  And – generally, they would.  I just had to ask.  (Not my job, really, but, whatever).

And I would then have to wait, a few days, a week, whatever, and the power supply arrives – so I can FINALLY plug in my brand new effects pedal.  Finally use it, finally hear it – at last. But it is just not the same, as being able to plug it in the moment it arrives…nope.  A third-rate experience at best.  Sheer frustration and mounting anger at the worst end of the “DV experience” 🙂

After this had gone on for some five years, let’s say, they started resisting me when I would insist on the proper UK power supply, and then finally, just a couple of weeks ago now,  their salesperson told me, in an email, no less “you will have to accept that some of these effects (read: all of these effects) will come with a Euro adapter, and we may then provide a UK plug adapter with the Euro power supply”.

And, that, dear reader, was the wrong thing to say to me.  my reply was “Salesperson’s Name Here, I must certainly do not “have to ACCEPT” anything – “I am the customer, and, you’ve set a precedent with me, i.e, you have been supplying me with the proper UK adapter, AFTER each effects sale, with NO ARGUMENT, and at no charge for several YEARS NOW – and now, you are reneging on that, and saying that I MUST ACCEPT Euro plugs, and a crappy plastic ‘plug adapter’ to go with it ! – no thank you, and furthermore,  I refuse to trust my really expensive device to a £1.79 plastic UK plug adapter”.

So because they instigated this new “policy”, where they no LONGER supply the proper UK power supply at request or at no charge…which they had done for about five years out of the six OR seven years (or more) I’ve been buying from them, I’ve had enough – more than enough of their attitude – and if it costs them money, to supply what should have been in the box all along – well, that is NOT my problem.

I was a good, repeat business customer, a good one – but over the past two years, I’ve had to argue, argue, argue, and eventually they would reluctantly send me a UK power supply for the device I had just bought.

I got really tired of the whole subject.  I even called the UK store manager in Romford, and had a long talk with him about..about just how incredibly STUPID (THERE IT IS….THE ‘S’ WORD) the policy of sending Euro plugs (aka, something that in the UK, MAY AS WELL BE A LUMP OF USELESS PLASTIC WITH SOME ROUND PINS STICKING OUT OF IT) – and he agreed it wasn’t the most brilliant policy, but I thought we had reached an agreement, that they would continue to supply them to me when I ask for them…but I was wrong.

not so.  In fact, after the last conversation with the boss, it was then that I waited THREE MONTHS for a UK adapter to arrive for my Ground Control Pro. Almost as if he had told them to drag their feet…

 

But not long after that, the real arguments started, and the salesman started telling me what I “MUST ACCEPT”.

That was the signal for me to end my relationship with DV24/7 (except of course, in the event of me needing to use one of my many, many, three year warranties that I have with them for a number of my effects devices).

So the income and the profit from sales to me have how stopped, permanently, they claimed, in an email that they “valued my repeat business” but basically, I would have to accept Euro plugs with UK plug adapters…so from that threat, I could tell that clearly, they do NOT value my repeat business at all.

If they did, the precedent set six or seven years ago, would still be in place, and I would still get a proper UK power supply for each device I purchased.  But – no more

All the other stores, I will be completely honest with them going forward:  I will EXPECT a UK adapter with each pedal I purchase – or, I will give the business to the vendor who will happily say “yes” to that humble, simple request.

 

WHAT THE MANUFACTURERS MEANT TO HAPPEN

(and what they supply to MAKE it happen in the different markets)

 

As if the all of the above wasn’t enough, now, please consider this:

Each manufacturer, for example, Eventide (USA based) or Electro-Harmonix (USA based) has included in the price of their effects pedal, a working power supply for that device, which should be different for each non-USA country it is sold in.

So let’s imagine that you bought a pedal from a well known online store in the USA, and you LIVE in the USA.

Let’s say it’s that Eventide H9 I mentioned earlier.  You would receive that H9 in a box, with a US style two-flat-bladed-plugs-bearing power supply.  You open the box; you plug that two prong flat bladed US style plug directly into the nearest 110v US outlet in your US home – And you are instantly delighting in the beauty of the H9 experience.

So let’s now imagine that you bought a pedal from a well known online store in Germany, and, YOU live in Germany…or anywhere in Europe except the UK.

Let’s say it’s that Eventide H9 I mentioned earlier. You would receive that H9 in a box, with a Euro style two-round-pins-plug bearing power supply. You open the box; you plug that two round pin style plug  directly into the nearest 220v German outlet in your German home – And, you are instantly delighting in the beauty of the H9 experience.

Repeat above  paragraph for Japanese market.

Repeat above paragraph for South American market.

Repeat above paragraph for any non-UK market.

 

Finally – let’s now imagine that you bought a pedal from a well known online store in the UK, and, YOU live in the UK.

Let’s say it’s that Eventide H9 I mentioned earlier. You would receive that H9 in a box, BUT, much to your everlasting astonishment – instead of the 3-flat-bladed UK style power supply you expected (just as with your toaster, your hair dryer, your washing machine, your hoover…) but instead, to your ultimate dismay – you find, inexplicably, that you have instead been sent – a Euro style two-round-pins-plug bearing power supply.

You open the box; you remove the wrongly supplied Euro power supply in disbelief, which you cannot plug in anywhere in the country you live in – And, you now have no idea what the H9 SOUNDS like, because you cannot plug it INTO THE WALL as you can in every OTHER COUNTRY ON THE PLANET.  And – you DO NOT GET TO DELIGHT in the beauty of the H9 experience.  Not for days or weeks or latterly, apparently – ever.

Eventide MEANT for you to get that box, open it, plug the RIGHT power supply into the proper outlet, and play your guitar through their pedal. Immediately.  You PAID for that, you paid for the good experience, the one where you get to actually use the pedal you just bought.

No..not here in the UK.  Instead…you get argument.  You spend literally hours, emailing, calling the DV24/7 boss AGAIN to complain.

THE LAST STRAW

There is one remaining wee story to tell.  And that story is about a device that I bought from DV24/7 … LAST YEAR.

I bought a new Voodoo Labs Ground Control Plus MIDI controller from DV24/7 in late October or early November – the actual date isnt really important.

 

you’ll never guess, to my amazement…it TOO, like the Eventides and the Electro-Harmonix pedals before it, the Ground Control Pro arrived…with a Euro style round pin power supply – with a twist, it was an AC adapter (rather than the much more common DC adapter), with a higher current requirement than most pedals have.   Still useless though…I did say “Euro” and “round pins”.

So standard procedure, I rang up or emailed DV24/7 and said “please send me the correct voltage Voodoo Labs UK power supply for my Ground Control Pro”.  I got argument and stalling.  I rang the boss yet again, applied pressure verbally…he promised they would send the adapter.

still no adapter.  Christmas passed.  I cajoled, I asked nicely, I became irritated…no result.

New Year passed.  I wrote again, this time simply saying “appalling customer service, making a good, repeat customer wait OVER THREE MONTHS for a lousy power supply that costs £2.00 to produce in Asia…you ought to be ashamed”.

Nothing.. No response to my emails anymore.

 

then, tonight, on January 20th, having waited thru November, thru December and thru most of January with no power supply – when I got home, a small box from DV24/7 had been delivered to my neighbour.  I went to retrieve it.  Finally – and, by the way, NOT a Voodoo Labs supply at all, but the cheapest of the cheap generic type adapter, BUT the right voltage 9 volts AC at 500 ma – so theoretically usable with the Ground Control.

The adapter was promised over and over, the salesman promied, then his BOSS promised it, and it didn’t arrive.

I doubt it was my “you ought to be ashamed” message that finally caused it to ship to me – but it should have been.

They still owe me a power supply for an EHX pedal I bought recently. But we shall see what happens with that one.  But, I won’t expend the least bit of effort on DV24/7 any more, no more chasing down a power supply EVERY SINGLE TIME I BOUGHT SOMETHING.  For SEVEN YEARS.

 

A SIMPLE, SIMPLE SOLUTION EXISTS

DV24/7 have some internal “problem” where some their stock that is to be sold in the UK, comes from Europe, and it has Euro plugs in it.  But guess what – the manufacturers make at least four different adapters, that are supposed to be sold in the US, the UK, Europe, and Japan.  So – you, as the distributor of these products, are supposed to be SMART ENOUGH to order the right boxes with the right adapters for each country you are selling them in.

A quick example of a smart policy:

You are a big music store with stores in Europe and in the UK.  Sales are roughly equivalent in both areas, so, instead of buying 1000 boxes of EURO Eventude H9s, you order instead, 500 boxes of Euro H9s (which you sell in EUROPE) and 500 boxes of UK BOXES, (which you sell IN THE UNITED KINGDOM). Simple.

Under my clever scheme (see above) the customers in BOTH Europe AND the UK END UP WITH THE CORRECT POWER SUPPLY when they receive their order. Rejoicing. No more phone calls.  No more emails. No more arguing with customers.  No more customers so traumatised by their never-ending NEGATIVE EXPERIENCE AT DV24/7 that they finally just say NO MORE.

NO MORE.

 

Now – clearly, their purchasing department wasn’t smart, and all their pedals are in EURO boxes.  So this won’t ever end, with DV.

BUT INSTEAD of them making their problem by MY problem, and pawning off their unwanted garbage/Euro Lumps Of Plastic onto UK customers who DO NOT WANT THEM…instead of you making your problem be my problem…why don’t you just SOLVE the problem, and buy the boxes with effects with UK power supplies in them, to SELL IN THE UNITED KINGDOM???

by the way:  I ***HATE*** it, when companies, or people, make THEIR PROBLEM be MY PROBLEM.  I refuse to allow that.  My time is too valuable, too precious to waste on the “Euro round pin power supply game”.  It is a game that sucks, I can tell you that much for free.

THE REAL INTENTIONS OF THE EFFECTS’ MANUFACTURERS

Remember, the manufacturers, WANT YOU not only to get a power supply with your device, but, they WANTED for it to have a power supply with it, that meets the following  criteria (you PAID for all this – it is included in the effect’s price!!!!):

a) fits the outlets in your country

b) supplies the right voltage and has the correct current handling requirements for your device and your country’s power outlets

c) you PAID FOR THAT privilege, to be able to plug right in and enjoy your purchase – whereas, I got to LOOK at how nice my new effects looked, for many days, while I waited for the “afterthought” correct UK adapter to arrive – and, looking is not HEARING or ENJOYING, is it?? and

d) they did NOT intend for you to receive the WRONG PLUG type, that does NOT plug in, in your country, and is, to a UK customer anyway, a useless LUMP OF PLASTIC with two round pins sticking our of it.

 

CONCLUSION (?)

 

i rest my case.  As Bryan Ferry once said “don’t let this happen to you!!”

I told you I could find the STUPID stuff.

 

 

 

peace and love and UK POWER SUPPLIES FOR ALL!!!!

 

Dave 🙂

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

from the garage to garage band – a long road

hello fellow travellers,

 

just checking in before 2016 gives way to 2017, I have been quite preoccupied of late with my new guitar system, I’m building three pedalboards at the moment, and I am in the middle of creating 200 MIDI presets to call up an enormous range of ordinary, unusual, and ambient guitar sounds – from massive distortion (as in, Crush Station and Sculpt) to beautiful modulations to amazing delays to gorgeous reverbs (thanks to Space) or incredible combinations of delay, echo, repeat, and reverb (as in SpaceTime, Ultratap, and Resonator – three amazing H9 modules) so instead of uploading tracks and writing blogs and putting items up on Twitter – instead of any of that, for something like the last two or three months now, I’ve been slowly working out the way these three boards should work.

I have, in an attempt to at least release something for the New Year, I’ve uploaded two completed tracks to the new “music for apps: garage band – an eternal album” record and they are a couple of really interesting pieces – the first one, “preponderance”, is eight minutes plus of something so strange, involving so many interesting sounds and loops, and musical events, that I find it almost impossible to describe.  the best thing is to give it a listen, it’s quite unusual.

the second song is much shorter, and features a strange, dissonant bass line that I actually played on my iphone, on the Apple “McCartney” style bass interface, and then looped in Garageband – and then, I proceeded to create an entire song, entitled “demonstrations of affliction” (in honour of Bill Nelson’s “Demonstrations Of Affection” – of course!) over the top of this very strange and repetitive bass line.  But – it’s interesting, and I look at “what works” with what in a slightly different way after this experience.  there are times when the bass loop clashes loudly and horribly with the overdubs, but, I do insist – it’s SUPPOSED to be that way!  Really, it is.

these two pieces brought me a lot of joy in their creation, and there are two or three more that I’ve been working on that are not quite ready for prime time – but, once I’ve finished those – I will put them up, I am really enjoying the “garage band experiments”.

now – back to what is important – these crazy pedalboards.

 

why are there three? – well, because that’s what works for me.  everyone does pedalboards differently – I want three, but, the three work together to form one giant system.  and that is actually really awesome!

so the first board, is for non-MIDI stompboxes, such as, pitch, distortion, overdrive, EQ pedals.  that’s a small board, with perhaps, 8 or 9 devices – and, it can be used standalone for practice or rehearsal, or for very small gigs where you don’t want to haul all of the equipment.  this board is known as the “Input Board” – this is where the guitar signal starts.

then – there is the MAIN board, which is for MIDI-controlled stompboxes.  This is where my Eventide devices live, along with their dedicated power supply and a MIDI splitter and cables.  this is where the magic happens, by combining different patches across the H9s, or using the Pitch Factor and Space stomps to provide harmony and … space…the possibilities here are staggering.  so this is the heart of the system.  The output of the Input Board, plugs into the Input of the Main Board…so I drive the non-MIDI effects into the MIDI controlled effects.

finally – pedalboard three – is the “Control Board” – this is the simplest of the boards, it contains a large MIDI pedal, that can be programmed to call up all of the different patches on the five devices.  Along with that, are two expression pedals, which are used to alter different parameters on different effects, you know, like the speeding up and slowing down of a leslie speaker simulator, or increasing the spaces between the beats on a tremolo and so on….plus a third expression pedal to operate a stand-alone non-MIDI delay that I use (exclusively) for reverse guitar sounds.

yes, I could have got reverse guitar sounds from the H9s (and I do, actually) but I wanted to free up a bank – so by adding the delay, that means, I freed an entire bank that had been dedicated to reverse sounds.  so I am much happier this way, because I can now make any of the 200 patches – play in reverse.  That is brilliant!

 

but this is where this whole pedalboard building experience really amazes me…if I step back a moment in time, to when I was about 13, and I was in my first real band, and I had a no-name red semi-acoustic electric guitar, and I played through a single channel of a tiny amp, with another guitarist (the owner of the amp) plugged into the same channel of the one channel amp – I didn’t have an amp of my own, so I had to plug into one of the other guitarists’ amps!  That – was my “set up” in 1971.

I remember speaking with the drummer in the band, Brian Monaco, he and I were the main singers, so we solemnly both decided that we would each buy a Radio Shack best quality vocal microphone for something like $25.00 – which was a huge amount of money, and then we had to buy the mic stands, too…no boom for me, just the straight stand with the massive, heavy weights at the bottom.  Brian had the expensive stand with the boom, because he needed it – he was the drummer, after all.

We plugged both mics into one tiny guitar amp, and with the guitars all plugged in together in a way that you just should not do… and that was the bands’ set up.  Three tiny no name amplifiers, with three guitars and two microphones plugged into the six possible inputs – and all three amps were single channel, so the sound must have been terrible.  But – we didn’t notice – we just played.  Amazingly, there is a tape of that band, which you can find somewhere on this blog, in the “companion” to the blog – there are a few tracks from that gig posted.

So when I think back to that, and I then consider what my guitar system is like today, some forty plus years later – with my MIDI controlled presets (20o of them!) and the endless combinations of effects and sounds I can retreive with one button push – I can’t really believe this is happening, it doesn’t seem possible, but – it is.  I’ve just done my first sysex backup of the Ground Control Pro MIDI Pedal, which was very exciting.  It actually worked – which means I can back up and restore the entire contents of the MIDI pedal as needed – which is great!

I often wish that my “13 year old self” could just see my current 2016 set up, so he would know (have known) what the future held.

I remember when I was 15, I began to use guitar effects, first, I had a wah wah pedal that I bought myself, which was a great tool, and then later, a cast-off and not very good sounding Arbiter Fuzz Face, the old red one – which I now wish I still had! and then later still, I had the use of an Echoplex, which was simply an amazing tool, when I was something like 16 or 17.   If I could have seen where that was headed, to modern delays, loopers, and so on – I would have said “no way, this is simply not possible”…

My 13 year old self would not have believed what can be achieved with MIDI and guitars, it’s simply astonishing technology – and I was blissfully unaware of it until much, much later in life.  But I’m glad Ive gone through this, and I think that it’s better to have a good sounding guitar, with a range of different interesting patches, than just ONE GUITAR SOUND – always the same.  That does seem dull, and I know that as a guitarist, I should love the idea of plugging my strat into a tube amp, with NO pedals, and just wailing and waxing poetic with the pure sound of tubes – and yes, I do love that sound, but…not to the exclusion of all else.

 

I think effects are important, and I do spend a lot of time, trying to get them to sound as natural and as organic as possible, I want you to hear the guitar playing first and the effect, second – definitely. I don’t want to be defined by effects, but by my note choices and the songs I write and record and play.  So I do try to remember my roots, try to remember what it was like, always playing through a borrowed amp, for years, as a teenager, because I couldn’t afford an amp!

The truth is, the last time I even OWNED a tube amp, was at least ten years ago – no, at least 12 or 13 years ago (a beautiful small black MESA Boogie which I should NEVER have sold – SIGH!!) so perhaps someday, I will get into amps again.  I think in this day and age, using a high quality device such as the H9 for my main sounds – that I can do just as well (using only a pedalboard into a clean stereo power amp) as a tube amp and no one will really know the difference, – except other guitarists.

I have never hidden the fact that I love effects, and I mean, I have gone pedal mad, I read about pedals, I dream about pedals – and I think there are some truly wonderful pedals out there that can transform your playing and take your guitar sound into the realms of the beyond.  I’ve finally realised that that, is where I want to go.  Beyond.

 

 

We have the technology – so – why not?

If you see what I mean.

 

 

I must now return to programming, I am on bank D now, so, I have about 140 of the 200 presets entered.  Wish me luck on the rest…

 

ta

 

Dave at pureambient

 

 

Happy Very Belated Christmas and a Merry New Year to all !!!!

 

Studio Diary – September 17, 2016

Aka   Eventide Heaven for ambient guitarists…

September 2016: mad flurrying to Aylesbury on the train for the Return Of The Crimson King (please see my previous three blogs – 3/9, 4/9, 5/9) …a day at the truly remarkable Bletchley Park, taking in an evening play at the Old Globe, and the guilty pleasure of a Warner Brothers tour of the Harry Potter sound stages…then, chaotic problems with trains over-packed with frustrated commuters, only, we were just trying to get home to Scotland from Aylesbury…

Then – finally, back home again, later than anticipated but intact – and trying to assess what already recorded music needed to be dealt with – and the answer, as always, was “quite a lot”.

A spur of the moment decision to attend the live Eight Days A Week screening at the Vue Theatre, a very enjoyable three hour plus evening of Beatles music – absolutely fab. The boys were playing their hearts out, George played some excellent solos, and I really enjoyed seeing “The Touring Years” – and as Giles Martin did the music, this meant that murky bits of Beatle history such as the now ancient-looking “Beatles At Shea Stadium” suddenly now rock hard, you can HEAR the music now and what Giles did here, and throughout the project, is nothing short of amazing. I am sure George M. is smiling, grinning actually, somewhere…

Meanwhile, I’ve been quietly working on a number of new pieces, or new pieces a number of I’ve worked quietly on meanwhile, I am not quite sure which.

Most of the past year and a half, has been filled with the large amount of work required to complete just three lengthy pieces of (progressive rock) work: “the complete unknown”, “planet obelisk” and more recently, “day seventeen”. 

These creations required a lot of painstaking work, and since they are all built from scratch as I went…it takes time. I think the first one took the longest, “the complete unknown” but by the time I got to “day seventeen” something had affected me, and it took me far, far too long to create this most difficult of pieces.  I struggled, which is unusual, normally, I just move along apace, it takes time, but I keep going.  But this time, I had to re-play guitar parts multiple times, some of the parts just wouldn’t reconcile…it took weeks, maybe months, longer than it should have, and I was so, so pleased when it was finally done!  A huge sigh of relief.

In the end, though, I managed to complete all three, and have since decided that I will be taking a break from progressive rock and very long songs, and will be revisiting my first love: the electric guitar.

To that end, I recently created one of a very few new “eternal albums” planned for this year: “electric guitars – an eternal album”. Which then meant that I could begin to work on shorter, live pieces and use some of the great new guitar tones I have available as well.  

Thus began a couple of different work streams, one looking back and the other, looking forward. It also meant that the relatively “new” eternal album has suddenly grown to about 50 tracks – or rather, it will once I upload the outputs of the past one week of work on mixing and mastering.

Beginning with the “looking back”; sometimes, in the middle of a project say, when I might be feeling frustrated by a lack of progress or frustrated by simply not knowing what sounds to make next in a piece in progress, I will “take a break” and just play some guitar for fun.  

June 15, 2016 was one such day, smack dab in the middle of the sessions for “planet obelisk”, one afternoon or evening, I sat down, plugged my guitar in, and played for some 60 minutes plus, doing an extraordinary, non-stop 26 takes in a row, using various sounds from the (then brand new) Eventide “SpaceTime” algorithm..

If you haven’t yet heard what SpaceTime can do – you should! It’s a remarkable amalgam of echo, delay, reverb, shimmer, reverse and I don’t know what else, and I had only just received the update when I decided to embark on a sort of “SpaceTime Jam 1” exploration of the sounds that the H9 pedal could make with this brand new algorithm..

Over the past few week, I reviewed and assessed these tracks, and a remarkable 25 of the 26 takes from the 20160615 session, were viable. So I decided I would do a sort of arbitrary “grouping” of these very live takes, into short song cycles of 3 or 4 takes per “song” (and in one case, just 2 takes making up the final song of the cycle).

So I ended up then, with eight quite interesting songs, mixed and mastered – and as I was working on them I thought…I could add some drums to these, and then release them, explaining that they were sort of made up of the same musical DNA as “planet obelisk” is. In some cases, in many cases in fact, I used drums leftover from the “planet obelisk” sessions.

In other cases, I would create new bespoke drum parts, or adapt existing parts to fit the improvised electric guitars. Adding the drum parts in ended up taking quite a bit of time, off and on, but when all eight tracks were complete, I was glad I’d made the effort. I also did one bespoke tabla part, which utilised Native Instruments “India” and that was a blast – I played one take, live, along with the three guitar tracks, including not playing in between the takes…and coming in at the right time. I managed to hit it all on take one, and “playing” the tabla is an absolute blast – I love this instrument (India).

The guitar takes are all improvised, on the spot, and in almost every case, the natural spaces between them, as it happened, have been preserved – because the session was rapid-fire, and the 26 pieces were played in surprisingly quick succession, with very little time between takes – in some cases just a few seconds, long enough for me to change the patch, and then dive into the unknown again.

Every take used the same basic preamp sound, which is my >Frippy patch from the new Sculpt algorithm – that’s the constant. A plate reverb was also used, and I then changed SpaceTime patches on one device as I played. Being able to use the H9 Control application on my tablet really was a life saver, I could change the patches manually with almost no effort, so you do get to hear a broad, broad variety of the SpaceTime algorithm’s many amazing patches.

More than the sum of songs, because in some cases, i would change the patch mid-song, sometimes multiple times within one song. Also, where I was able and it felt appropriate, I also used expression pedal on some of the patches, which then gives you deep and wild control over many variable aspects of any SpaceTime patch you are using.

The expression pedal implementation in the Eventide H9 is remarkable right out of the box, and every one of the patches features a range of possible expression pedal values, carefully chosen for the best effect – for rotary sounds, obviously, it’s the speed that the pedal controls, but the range of expressions possible with the H9 is simply staggering – what a brilliantly designed device.

I was mesmerised by the beautiful sounds that SpaceTime gave me, and I play a fairly joyous hour of happy and heavy lead and rhythm guitar. And that hour of music, took me 65 minutes to do – so no faffing about between the takes – I really just got on with it, trialling dozens of SpaceTime patches and taking many, many expression pedal excursions too. A wonderful session that I really enjoyed, which does contain quite a lot of “planet obelisk” DNA – without really sounding anything like it.

The 25 viable tracks then, were edited into these eight new “songs”; which vary in length from perhaps, five and a half minutes long, to over ten minutes in length in one instance. The total running time actually becoming about 55 minutes of music in total, mostly because of the fact that take one was unusable, it was a great take, but the levels were far too hot, and it suffered from multiple wounds of digital distortion, and nothing I could do would have saved it – a sad loss, but I was very happy that I turned everything DOWN after that and captured nice clean versions of the remaining 25 tracks.

The resulting eight tracks are:

building the obelisk

all good children go to heaven

beautiful metallic noise

the occasional chord (to remind us)

it’s echo soup in here

the heavens unfold

since the dawn of time

reaching catharsis (bridge)

A possible ninth track may be uploaded:

the road to obelisk – 55 minute track compiled from the above listed eight tracks – this recreates the continuous nature of the original session – if successful, it will be added to the upload list as well.

It is my hope to upload the above eight (or nine) tracks over the coming week if all goes well. Along with the appropriate outputs from the forward-looking project, which came from a session that I had somewhat arbitrarily named “brief session” – and it was, if compared to the “planet obelisk” 25 takes – the new “brief session” contained just 10 takes, although take 7 was an extended take with something like six individual parts on it.

The first six takes are very, very ambient, indeed, and are really a highlight of the session – the remaining four, used distorted guitars instead of clean, and although interesting, they did not come out nearly as well as the first six, which used clean guitars and more Eventide H9 wizardry.

I am very, very excited about these six tracks, which represent the bulk of the session time-wise, because for the first time in my memory, I was able to play ambient guitar, without the use of either a looper or of an ebow (energy bow) – I can now create very, very ambient guitar, just using the stock algorithms from the Eventide H9.

That is an incredibly freeing experience – yes, you do still have to play the guitar, but, the beautiful sounds that come out, whether produced by SpaceTime, Resonator, or MultiTap (such as “UltraTap”….heavenly patch) it matters not – there is not just one ambient sound available, but in fact, droves of them, and I can see myself playing a lot of clean, careful guitar into an H9 (or two) that can translate that input directly into the kind of soundscape I’ve always wished I could produce.

My best method of creating that atmosphere has always previously been, running an ebow guitar into a looper and then into a good reverb unit. And of course, I will always, always still do that, because I love to do it – but, the H9 gives me an alternative to that, where I don’t need to rely on the ebow or the looper (however, I have retained and have used the ebow on several of the eight tracks above), because that made them sound even better, so ebow + SpaceTime is a winning combination for me. Ambient guitar made…a little bit easier than it used to be.

For the six tracks below however, I did not use the ebow – I didn’t need to, the pure ambient output from the H9 was all I needed.  What a brilliant device!

The resulting six tracks are:

exogenesis

exoskeletal

exospheric

exothermal

exocyclic

exonumia

I cannot express how wonderful it was to be able to create these pieces, and I sat there in awe of the sound design that has gone into the Eventide algorithms – especially those that I would call “totally ambient” – and there are many, many of these sprinkled here and there within the algorithms.

I see this then, this set of six songs, to be very future oriented, very forward-looking, and I will very probably be exploring much, much more along these lines, in hopefully some longer-form improvs, just what I can achieve for ambient guitar, without resorting to ebow + looper + good reverb – although, that is still a great formula for ambient music!

I feel like a man who has been given the actual sound of heaven, and by gosh, I am going to use that sound – those sounds – as often as I can, because they are truly remarkable. Even one of the oldest of Eventide’s algorithms, “Space” – their do-all reverb magic box – is an incredible tool, and contains reverbs that can also act as ambient guitar creators – it’s all in there, in that little white box…

“exogenesis” was the starting point for me, I could just close my eyes and hear those ethereal sounds, and realising that I was just playing clean guitar notes, slowly, carefully – and this river or ocean of beautiful, ethereal, reverberant sound just flowed all around me – as it should do. I could really get used to this – I really could.

The six super ambient tracks from the “exo” series will also be uploaded in the near future – as soon as possible.  

So, I haven’t been absent at all – I’ve been busy!

love peace and order

🙂  dave

universe of sound (the komplete world)

after forty-odd years in the music business, we decided at the start of this new year, that we would acquire a software suite called komplete 9 ultimate for use at the pureambient studio. the software comes from a remarkable german company called “native instruments”, who are truly the masters of sampling technology – and a few other things, too –

 

KOMPLETE 9 ULTIMATE – OVERVIEW & PRE-APOLOGY

 

this acquisition was intended to fill a few glaring omissions in our capabilities, such as proper strings, horns, basses, percussion, and so on, as well as providing the main elements for extending the classical music that we began releasing last year on the eternal album “classical”. this tool will allow for a speedier construction of classical pieces, rather than relying on the more piecemeal approach used on my first piece of classical music, “concerto no. 1 in e minor for oboe and guitar” – which was constructed almost line by line, using nothing but a guitar synthesizer.

 

as well as supporting classical music over the coming years, komplete 9 ultimate is also a natural for, and is eminently suited for, the production of music for films, which is another area that we hope to expand into over the coming years. this acquisition also bolsters the worlds of ambient music, as well as pop, rock, funk, jazz, and countless others – it’s hugely supporting in all genres, especially ambient.

 

we’ve only been using it for a short while, but already, we can see the enormous potential that this software suite has for adding quality sounds to the pieces that we create here.   and, it’s infinitely expandable, too, native instruments have purchased third party sound libraries and bundled them into komplete 9 ultimate, but you can also purchase other third party programs which you can play using komplete 9 ultimate “kontakt” sample player. so we will also be looking to acquire some of the best ambient libraries, which will also greatly expand our capability.

 

before I speak more specifically about what komplete 9 ultimate can do musically, I’d like to apologise to all early adopters and those who own komplete 9 ultimate or “kontakt” or both, I freely admit I am an absolute novice, I’ve been studying the suite in detail, learning the processes, slowly, over the past few weeks, and I do have a basic understanding in principle for most of what can be done with komplete 9 ultimate.   forgive me in advance if I say anything that shows just what a rookie I am at this, or I otherwise put my foot in my mouth – learning something like this can be a somewhat slow and painful process, even more painful when you are no longer young as I am. and – komplete 9 ultimate users – feel free to jump in and correct me, or offer advice or expand on anything I mention here – we are all of us learning at all times…and it’s best to share such knowledge freely.

 

my friend and collaborator ken mistove, my partner in saffron matted voids (the band), is a long time “komplete” user (I am talking about really long time – ten years! – and he has been doing electronic / digital music for longer still), and he warned me that I would be overwhelmed by this program – and, he could not have been more correct. in fact, weeks after it’s arrival, I continue to find more and more incredibly well-thought-out functionality, as well as becoming familiar with the synthesizers and the sample content. and it is almost totally overwhelming – it seems, almost, as if there is nothing this device cannot do…everywhere I turn, everywhere I look, I find something else that makes my jaw drop…

 

 

 

KOMPLETE 9 ULTIMATE – THOSE AMAZING SYNTHESIZERS

 

[ULTIMATE INDEED!]

 

 

so – where do I begin?   well, when it came down to it, even though I was incredibly excited about the sample library, and the sample player (which allows multiple instances of many, many instruments in one session – I had fourteen instruments loaded into a session yesterday, and the software coped beautifully) – it was the synthesizers that I gravitated to initially – because, perhaps, I knew they would be easy to set up and use – familiar. before we purchased komplete 9 ultimate, I had read in detail about the synths, so I couldn’t wait to hear them in person – and I was right about the ease of set up and ease of use: within seconds, I was up and running with “absynth”, a personal favourite synth that seems to favour ambient and atmospheric sounds.

 

but “absynth” is a drop in the bucket, a handful of stars in this incredible universe of sound, and while it features hundreds and hundreds of truly beautiful preset sounds, it’s just one of nine synthesizer models built into komplete. the entire list of available synths looks like this:

 

  • absynth
  • fm8
  • massive
  • monark
  • razor
  • skanner xt
  • reaktor (modular synth system – containing many synths)
  • reaktor prism
  • reaktor spark
  • retro machines (which contains no less than 20 classic synthesizer instruments within)

 

so far, I’ve only truly managed to hear and use five of these synths, absynth, fm8, massive, reaktor prism, and retro machines, but even so, I’ve been utterly impressed with the build quality and the amazing attention to detail – this is precision german engineering like we used to have back in the 60s and 70s!

 

I have created a few test pieces in absynth (consequentially falling in love with it); I created an entire suite of 23 pieces using the fm8 synthesizer dave stafford – music for pcs: komplete synths”, I’ve created one very complex ambient piece (which is incredibly atmospheric) using massive “wanders down to the sea”, and for fun, I’ve played some of the classic organs, electric pianos, etc. in “retro machines” – “synths within a synth” which is a strange way of working, but I am getting used to it 🙂

 

in every case, the attention to detail, and the extremely fine level of control over sound in every one of these synths, has been overwhelming and most, most welcome. I have a lot of soft synths, but this collection of nine software synths kind of…blows away the competition, and as my friend ken mistove also said: “you will never need to buy another instrument” – and I can already see the truth in that.

 

while I might not “need” to, of course, there will still be some cases where I will “want” to – I am especially interested in some of the available third party ambient sample libraries, but that will have to wait – in the meantime, I have an awful lot to learn and trial just with the komplete 9 ultimate package itself.

 

after my initial very positive experience of playing and using “absynth”, I moved on to “massive”, and I decided to lay out and record a track using four instances of “massive”, each set to a different sound – and I then did a somewhat clever arrangement where I muted sections of each track, to allow other parts to shine through, creating a sort of ever-changing mood – a dark mood, with the sound of wind and seagulls crying and a vision of a bleak, grey storm-tossed day – again, I was amazed at how quickly and easily I could set up four instances in my host (my somewhat antiquated SONAR 8.5) and it coped beautifully – no problem.

 

I also created a short ambient piece within “reaktor”, using the “reaktor prism” synth; a portion of this track remains, entitled “fragment of a lonely molecule” – a truly beautiful sounding synth, which I plan to revisit often and use much, much more…

 

encouraged by the success of “wanders down to the sea” in “massive”, I then turned my attention to “fm8”, in which I created a whole series of tracks (“the rings of saturn”) from “dave stafford – music for pcs: komplete synths”, as well as some arranged “suites” where I took a set of smaller files and mixed them into long, linear sequences – providing a blended view of the basic tracks, as opposed to the individual view of each piece.

 

a few hours later, I realised I had created no less than 23 tracks using “fm8”, and I am so enamoured of this synth, it has a lot of great, visceral sounds, and a lot of charming, melodic, or dissonant, or strangely jazzy, arpeggiators, and the sheer range of voices available within fm8 is mind-boggling. It was a fun session, and as such, I made the decision to create two eternal albums for komplete: one for “komplete synths” (LINK) and one for komplete samples (LINK).   These have both been up and running for a couple of months now, and while the “komplete synths” album has a reasonable number of tracks, I’ve been very slow to create using the “samples” – but, I will get there, I will – I just need time! 🙂

 

the 23 tracks made with “fm8” and the one piece made with “massive” “wanders down to the sea”, are all uploaded to the “dave stafford – music for pcs: komplete synths” eternal album. I plan on working with each of the synths in turn, and uploading the results, so you can hear what each one of these remarkable sound creation tools can do. If I have my way, by the end of this year, the “komplete synths” eternal album, will have dozens of tracks made with a myriad number of available synths – and I hope I can just keep creating and creating – those are 9 amazing synths, each a master of the domain it covers, and I can’t wait to create more music with all of them – the synthesizers built-in to komplete 9 ultimate are absolutely brilliant!

 

THE HIDDEN GEM WITHIN KOMPLETE 9 ULTIMATE – GUITAR RIG 5

before I continue on to the samples section, I must not forget to mention one of the biggest selling points of komplete 9 ultimate, for me, which is the presence of “guitar rig 5 pro” – I had been underwhelmed by an earlier version of guitar rig, which I got bundled with SONAR, “guitar rig 3”, so I’ve now uninstalled that and I am using “guitar rig 5 pro” instead.

 

what a difference. the preset library is vastly improved, and the range of effects, and the flexibility provided in setting them up in the rack, are simply astonishing – to me, this is one of the most important pieces of guitar software to come along. so after working with the synths, purely for fun, I recorded a handful of pieces using “guitar rig 5 pro” – and I am more than impressed with the sound quality and the presets – it’s an awesome and powerful guitar amp and speaker cabinet emulator, and it has a huge range of high quality guitar effects as well. a couple of these pieces may see the light of day, but they were mostly for reference, and just a way of trialling certain patches and sounds.

 

this is now to the point, since “guitar rig 5 pro” is clearly superior to many guitar processing devices in both the hardware AND the software arena – I am at the point, where I can now happily retire my ailing “line 6 x3 live” hardware pedalboard guitar effects processor, which is now basically redundant (it has served me very well since 2008, but it’s now time to be retired at long last).

 

because I can pretty much re-create every sound in the line 6 using “guitar rig 5 pro” instead, and more – so that’s actually a blessing – no more effects on the floor (although I will always have my faithful “output chain” of hardware effects, harmonizer, delay, reverb at the end of my signal chain) I believe I will now use “guitar rig 5” for most of my guitar sounds, and anything it can’t handle, I can program into my gr-55 guitar synth – so guitars, and guitar signal processing – are covered! and I mean…covered.

 

it’s always very difficult, because over time, you have various tools that you use to record guitar or synths with, and eventually, better tools come along. and, you can run both old and new, that’s not an issue, if you want to – but my preference is to keep effects units down to a dull roar – so I am going to TRY to retire the line 6 x3 live – I mean, it is six years old, which in dog years, is, I don’t know, 70 years or something – and technology has moved along SO FAR since the X3 Live was designed…

 

so for the first week of my fledgling native instruments life, I learned about the synthesizers and I learned how to run “guitar rig 5 pro” – and that was a huge amount to learn, but, I have the basics down, and I can rely on both the set of nine included synthesizers (plus 20 more vintage instruments within “retro machines mk II”) and the extremely impressive “guitar rig 5 pro” interface. I could have gone on working with the synths and guitar rig for weeks and weeks, but I wanted then to shift gears and look at the sampling capabilities of “komplete”.

 

SAMPLING – THE HEART AND SOUL OF KOMPLETE ULTRA

[REAL INSTRUMENT SOUNDS – AT LAST!]

 

the list of sample-based instruments is even more impressive than the list of synthesizers:

 

  • kontakt – the main user interface / sample player for all sampled instruments:

 

kontakt is a very powerful environment, that allows you to load multiple instruments (built by native instruments, and many other vendors as well), which can then be routed either each to their own output (for maximum recording flexibility) or they can be routed to various stereo or mono sub-mixes – really, whatever your heart desires. you can save overall “presets” in kontakt itself, so if you hit upon a winning combination, say, “abbey road drums 1960s” and “scar-bee rickenbacker bass” and “guitar rig 5” you can save that configuration, including whatever output configurations you have, as well as the specific settings of each device – to a kontakt “preset” – for easy recall / re-use..

 

another positive aspect of the kontakt sample player is it’s ability to play not just native instrument plug-in instruments, but also, instruments made by third party vendors such as soniccouture, waves, scar-bee, g-force, and many, many others.

 

each instrument that is loaded into your kontakt session, also has a page for it’s settings, where you can choose instrument presets, adjusting the sound of the instrument until you are happy with it – then, you save your changes – then, you save your kontakt preset – and all of the instrument settings are saved as part of your “overall” kontakt saved preset – fantastic. so you can create very complex presets, that contain your favourite instruments, set just the way you want them, which can be recalled instantly in any combination – it’s absolutely outstanding.

 

here is the seemingly never-ending list of sampled instruments that come with komplete 9 ultimate.

 

  • action strings
  • session horns
  • damage (industrial and orchestral, cinematic drums and percussion)
  • evolve
  • session strings pro
  • evolve mutations
  • evolve mutations 2
  • battery 4
  • abbey road vintage drummer
  • abbey road 60s drummer
  • abbey road 70s drummer
  • abbey road 80s drummer
  • abbey road modern drummer
  • studio drummer
  • west africa (a personal favourite)
  • balinese gamelan (another personal favourite)
  • maschine drum selection
  • scarbee rickenbacker bass
  • guitar rig 5 pro
  • scarbee funk guitarist
  • scarbee mm-bass and mm-bass amped
  • scarbee pre-bass and pre-bass amped
  • rammfire
  • scarbee jay-bass
  • the giant
  • vintage organs
  • alicia’s keys
  • george duke soul treasures
  • scarbee a-200 electric piano
  • scarbee mark I electric piano
  • scarbee clavinet/pianet
  • berlin concert grand piano
  • new york concert grand piano
  • vienna concert grand piano
  • upright piano

 

bear in mind that each one of the above instruments, has a broad range of “presets” giving you as many different optional sounds for each instrument as is possible, “muted”, “picked”, “fingered”, and so on – so it’s not just a “rickenbacker bass” – it’s a rickenbacker bass that can be configured from anything such as a very timid, high pitched highly eq’d clean bass sound, to various much louder presets that emulate different sounds that this bass is capable of, and that includes both DI and “amped” sounds, so you get an enormous range of flexibility with every instrument listed above!

 

as explained elsewhere, those settings can be saved as part of a kontakt “preset”, so you could have one set up with a super clean, thin sounding Ricky bass, and another with a very distorted Ricky played through an emulated British amp – two EXTREMELY different “bass guitar” sounds from the same instrument.

 

In the classical world, the options are of course, much different to the options for a rock instrument, so for violins, you would have a huge range of various playing styles or articulations, legato, staccato, pizzicato, and so on – and just about any kind of articulation you can imagine, including some rather obscure ones, and also, it’s incredible to get these precision articulations, and of course, as with all quality samplers, there are also extreme velocity choices, so that you can emulate the velocity that you would apply to the real instrument, on the keys of your keyboard instead. all of these options are on every instrument where they exist, although some instruments may have just a handful of possible presets or articulations, others may have dozens – maximum real-life playability issues have been addressed as much as humanly possible.

 

 

…not to mention a massive range of high quality software effects and audio processing tools included in komplete 9 ultimate:

 

  • solid EQ
  • solid bus compressor
  • solid dynamincs stereo compressor
  • rc-48 reverb
  • rc-24 reverb
  • vari comp compressor
  • enhanced EQ Equaliser
  • passive EQ Equaliser
  • transient master Equaliser
  • driver distortion unit
  • VC76 FET compressor/limiter
  • VC2A electro-optical compressor/limiter
  • VC160 drum compressor
  • the finger – live performance and remix tool
  • the mouth – generates melodies and harmonies from any audio input
  • reflecktor high performance reverb effect

 

 

for full details, have a look at the product page on the native instruments site:

and here is the effects page on the native instruments site:

 

 

my first foray into the world of sampled instruments was a piece I created using various sampled elements, entitled “the giant’s causeway”, which contains three sections:

 

1)     “the giant prelude” features “the giant” cinematic instrument (a cinematic / orchestrator / ambient piano kind of sample set) – I played one take, which was best, and that became “the giant prelude” – perfection.

 

2)     “allegro in a minor” features “action strings” (which include moving passages of strings created with an “animator” function – which is truly awe inspiring)

 

3)     “giants on the causeway” following, the third and final section of the piece; features a manually played drum part;/ the scarbee “rickenbacker bass”; and a truly beautiful flute and strings mellotron sample, plus a short solo on a vintage organ.

 

“the giant” instrument just blew me away, I did a take one take of a sort of reverse piano strings/unknown kind of sample, and it came out totally usable – in one take!!! I will absolutely be revisiting this instrument, and I could see creating large, ambient compositions using JUST this instrument.

 

once “the giant” section was recorded, I added in the “action strings” instrument, and spent quite some time writing and laying out a short violin quartet piece in the key of a minor. note: this is where the “staff” view in SONAR becomes invaluable!) while short in duration, the SOUND is amazing, it sounds so incredibly real (because, let’s face it – it IS real!) because of the use of the strings animator – which gives you real “sections” or “passages” of bowed strings – in a significant number of styles, legato, staccato, pizzicato and more. this section took me a while to complete, but eventually, I did finish it to my satisfaction.

 

the third part of this unfinished piece was a rickenbacker bass line, set against some manually played drums, finished off with a live mellotron take, flutes and strings – plus a short solo on a vintage organ – and I have to say, the scarbee rickenbacker samples are out of this world – there’s even a “british” setting which gives you a roaring live distorted chris squire sound that just blows you away. even on the clean settings, this instrument screams “I am an authentic ricky bass” – and the distorted scarbee bass part just SOUNDS amazing…

 

this piece remains unfinished, but I always considered it as a test piece, a learning curve, a learning tool, a learning experience. I did rough mixes, and kept the three sections separately as demos, but I don’t believe that this piece will be published, but if it does, it would definitely be “the giant” piece, possibly the string quartet, and doubtful, probably NOT the rickenbacker section…which SOUNDS great (especially the distorted ricky bass line!), but wasn’t (necessarily) a great piece of music…

 

so “the giant’s causeway” went onto the shelf, however, since it was my very first piece (beyond playing a few synths) – proper piece – done with komplete – I was happy enough with it. I learned…

 

I will very, very probably attempt the piece again; I would retain the original part one, since it’s a live, take one, that is basically flawless, I would rebuild and expand the string section, and completely revamp the “prog trio” of drums, bass and mellotron/organ at the end. so – I am keeping the shelved demo as a reference…for now.

 

I then turned to an instrument that I was very, very curious about, “west africa” – I lived in east africa for four years, and learned to appreciate african music back then (especially congolese music) so having high quality samples of african instruments was a very exciting prospect to me.

 

I first constructed a “duet” of two koras; one, playing midi patterns emulating a rhythmic picking cycle, and another kora, where I played melodies “free hand” on top of the moving background. I did two takes, both of which I enjoy, but since I am not entirely happy with the melodic content on either (although the second take is actually quite good) I have also shelved those – and since then, much more recently, I sat down again with the kora duet template, and create a third piece, another kora duet, entitled “the heart of africa” – and this take, I think is quite decent – and I thoroughly enjoyed working with these amazing sounds.

 

I plan to practice on all of the west african instruments, and I hope to arrange more complex pieces of music involving west african drums, flutes and stringed instruments…a side project that will keep me busy for years! I would never have dreamed that I would have a sideline in african music one day – but I will, because I love african music, and the more I work on it, the better I will get at emulating it…

 

after the two shelved kora duets, which were followed very recently by the successful kora duet, I then turned to my first use of “multi” instruments, and, with the invaluable assistance of ken mistove, I eventually learned and understood how to create multiple instruments within a single instance of kontakt – and once I “got” that, I could sit down and attempt a full on piece of sampled music.

 

I randomly selected a preset “multi” instrument from the evolve mutations instrument, and it proceeded to load 12 instruments that created one of the most atmospheric, eerie “drum kits” I have ever heard.

 

it took a couple of tries, but eventually, I got a good quality drum track, and then I turned to the other instruments. a proper bass part was in order, so I loaded up the scarbee pre-bass (amped version) and got a nice, full bass sound – recorded a bass part to go with the drum part – and again, very impressed with the scarbee instruments, they seem to do a very good job of getting the authentic sound of classic instruments sampled to perfection – the “pre” bass (i.e. based on the classic fender precision bass guitar) is another one that is of the highest quality, as the scarbee rickenbacker bass samples are as well – Native Instruments has scooped up two fantastic bass instruments from scarbee, and it’s a great acquisition – I hope they adopt more scar-bee products, I really do.

 

finally, I worked at overlaying a section of grand piano, courtesy of the “george duke soul treasures” instrument, an absolutely stunning set of riffs recorded on grand piano, electric piano, organ and other keyboards – and all simply classic – great sounding samples!

 

in this case, I actually reached the maximum possible number of instrument that can be crammed into one “kontakt” session – so once again, familiar theme emerging…I abandoned the piece unfinished – again. in order to complete it, I will need to mix down the drums and bass together from the unfinished session, and move to a new session to overdub many george duke piano samples atop the pre-mixed (bounced) bass and drums – and at that moment, I didn’t feel like going through that process.

 

instead, I set it aside, and I moved on to my next test piece, my next “komplete” learning experience.   I wanted very much to try the “session horns”, so I built a short introductory piece, entitled “softly, softly we go”, which featured a group of horns, in a nice reverb room, with a “soft” instrument setting, playing a mock classical theme – a lovely sound, and as far as it goes – a good intro or lead-in piece to some larger production.

 

to follow the horn intro, I wanted a drum track, using the abbey road 60s drummer (because I wanted to learn how to compose drum tracks) so using this instrument, I built a nice long drum part, with various sections, and some fancy fills, and I have to say, although completely unadorned, it’s one of my best pieces yet.

 

finally, I sat down and re-made my kora duet, creating a much better backing track, and, hopefully, performing better melodic lead parts atop the pattern generator rhythms.   that, “the heart of africa”, and my unadorned abbey road 1960s drum part, is where I am right now with sampled instruments – and using kontakt to create drum parts, using the abbey road 60s drummer – could not have been easier – in short order, I had the process down, to where I could build an intelligent, varied and interesting drum part quite quickly – the whole thing took less than an hour.

 

but – the piece remains unfinished, again, I have kept two separate demos, one of “softly, softly we go” – my gentle, quiet horn intro – and another of the untitled-so- it’s-called “abbey road drums 1960s” aka “run into town – run 1” for reference, I hope to probably re-make the horn part, make it more concise, and create more space in it, and of course, I then need to decide what goes on top of my beautiful, recorded in abbey road studio no. 2 drums. sigh… (note: eventually, of course, a Rickenbacker bass part went on top of the drum part – and then, a host of live energy bow guitars…),

I also had an absolute blast doing a bass solo with the scarbee Rickenbacker bass instrument, “amber waves of grain” – over 10 minutes of sheer Rickenbacker tone.

another aspect of komplete 9 ultimate is the undeniable fact that it is making certain instruments and software, no longer useful, it is literally making them redundant – as komplete can do the job more easily, with better samples, with a mature GUI (kontakt) than earlier third party apps can, or, better than older hardware effects can L.

 

so in this case, for example, while I will probably install my old drum machine software, which is called “BFD2” (this was utilised heavily during the making of “gone native”), I will only do so, so I can see and use the drum kits / samples it contains – which I would use via kontakt within komplete – NOT through the much more difficult to learn, and use, BFD GUI.

 

in a way, I really don’t NEED BFD any more, because I have several sampled kits from abbey road studios, plus, I have “battery 4” and a few other percussion based instruments – there is functionality and samples far beyond what BFD offers. so as I say, I would still use their kits (which sound great) but not their interface J.

 

so, if I am honest, komplete has made the following software and hardware items redundant:

 

redundant software:

 

bfd2 drum machine software + sonar’s session drummer 3 drum machine software – replaced by:

 

  • damage (industrial and orchestral, cinematic drums and percussion)
  • battery 4 (massive drum machine / sample player, with many, many drum kits)
  • abbey road vintage drummer
  • abbey road 60s drummer
  • abbey road 70s drummer
  • abbey road 80s drummer
  • abbey road modern drummer
  • studio drummer
  • west africa
  • balinese gamelan
  • maschine drum selection

 

note: both bfd2 and session drummer 3 are still available to use, either by using their kits from komplete / kontact, or by using their own GUIs if desired – but, not sure I would ever use either again given the list above.

 

redundant hardware:

 

 

line 6 “x3 live” guitar effects pedalboard – replaced by: guitar rig 5 pro, plus, sampled guitars and basses:

 

  • guitar rig 5 pro
  • rammfire
  • scarbee rickenbacker bass
  • scarbee funk guitarist
  • scarbee mm-bass and mm-bass amped
  • scarbee pre-bass and pre-bass amped
  • scarbee jay-bass

 

 

 

“digitech” TSR24-S hardware 24 bit reverb unit – replaced by:

 

  • rc-48 reverb
  • rc-24 reverb
  • reflecktor high performance reverb effect
  • galbarnum breeze 2C reverb (reverb plug-in for SONAR) – additional reverb choice “outside” of komplete itself
  • all four of these reverbs can be “called” from within SONAR, so it’s very, very useful to have access to these high quality effects, even for improving content that was not created in komplete 🙂

 

plus

 

  • eventide “space” hardware reverb – this is part of a permanent installation of three hardware four hardware effects that sit at the “end” of my mixer output chain – so, the final stereo output of the mixer, goes directly to these four hardware plug ins, and THEN to the sound card.

 

I’ve learned over time, that certain effects sound best in “front” (so just after the guitar, as part of your mix, occupying two or three stereo pairs on the mixer) while other effects work best “after” the mixer (such as pitch units, delay units, and absolutely, reverb units).

 

so, reluctant as I am to do so, it’s probably time to retire the “digitech”, and rely on the three high quality reverb units within komplete 9 ultimate – as well as galbanum’s 2c “breeze” reverb software – which in itself, was and is probably a replacement for the ancient tired “digitech” rack mount 24 bit reverb, not to mention the eventide “space”, which again, in itself, is probably a replacement / improvement over the digitech.

 

In a perfect world, I’d love to just run everything, and in some respects, I have been doing so, I’ve certainly kept a number of hardware devices running that I have replaced several times over – so I have to bite the bullet now, and actually remove the older, noisier technology, and whether I will or not, it seems that software synths and software effects are gradually taking over my set up, which is actually not unwelcome, and I hope that this summer, when the studio is moving, I can re-arrange the studio to support a less-hardware dependent sonic environment.

 

Purchasing komplete 9 ultimate gives us a lot of that software, bleeding edge software synths and effects, awesome high quality samples, and other factors, such as the emergence of very sophisticated applications for the ipad tablet and also, for the PC. In future, I will probably end up using a very hybrid system, were some tracks are created on the ipad (and eventually, too, mastered and mixed – tools have emerged…), and then moved into komplete, and then mastered and mixed in SONAR and/or komplete and/or Adobe Audition (where I do a lot of my simpler mastering now). The fact that I can do these processes in multiple “places” gives us an enormous amount of choice, it’s absolutely fantastic what can be accomplished.

 

Other tracks would be created wholly on the PC, using PC software only to create, master, and mix them.   Still others would involve the use of “real” instruments, guitar, synthesizer, keyboard, kaoss pad, percussion, etc. which can be processed through software packages such as “guitar rig 5” and also, the studio quality effects within komplete 9 ultimate. The RC-24 and RC-48 reverb units are especially absolutely lovely, they sound great, and I am really enjoying them.

 

The appearance of a massive army of music applications on the apple ipad, has changed forever the way I make music. Over the past few months, I’ve been scoring classical, acoustic guitar, and alternative music using a notation application called “notion” – and I can see myself exporting tracks from notion, and then importing them into komplete, to add the highest quality sampled instruments to the basic instrumentation created by my original score on the ipad.

 

I will absolutely be using a combination of pieces:

 

  • music created wholly on the iPad (which WILL include guitar and loop work, not just synthesizers – thanks to some truly quality guitar applications such as BIAS, Ampkit+, and GuitarTone)

 

  • music created using the ipad and my guitar or guitar synth

 

 

  • music created entirely on the PC, not utilising any ipad applications, the kaoss pad, or any “physical instruments” such as guitar or bass

 

  • music created using the ipad, the korg kaossilator, my guitar or guitar synth, bass guitar, live keyboards courtesy of various software synths, and anything else I can throw into the mix

 

(I call this last one the “all instruments” set up – it allows me to use, in a completely live setting, guitar, keyboards, kaoss pad, ipad, and of course, a lot of effects units, including loopers). The looper captures the live performance, and the output of the looper is optionally run through the pitch pedal, the delay, and the reverb (my standard set of output live hardware effects pedals), and finally recorded in SONAR.

 

The arrival of application-based music meant that my record-keeping was really thrown askew, because you can create so much amazing music so quickly with applications, I realised early on, I would need a special forum to create them in, so before things got out of hand, I split my recorded music collection into two distinct areas:

 

Music Dave Stafford – the traditional home of most traditional recordings, anything involving real guitars, real basses, real keyboards, and looping thereof – which may also include the occasional ipad or kaoss pad in a guest starring role – they are not banned, it’s just this is the home of more traditional instrumentation.

 

App-Based Dave Stafford – there is a folder for each app, containing both sessions and finished product, I am so glad I did this now, because now whenever I complete any piece in an app, I have a specific place to store it, from which to upload to Bandcamp, or Soundcloud, or to my website – or for whatever purpose I need it for.

 

This means that any very hybrid music, that crosses over between these two broad categories, I’ve chosen to move that kind of music into the “Music Dave Stafford” folder, because it contains the real instruments, which is really the main characteristic of the music in this folder – the presence of real instruments, played in real time or looped.

 

The arrangement is working well so far, I am not surprised by how many app folders I already have, and as time goes on, there will just be more and more, but I think that’s brilliant – and the emergence of more and more sophisticated application music creation tools, is almost irreversibly moving me more towards app-based music – my next eternal album is focussed on one of my more recent app acquisitions – the iVCS3 , a perfect replica of the 1969 beast of a synth that powered the sound of early roxy music and early king crimson – one of the first truly sophisticated modular synths, and the application version is uncanny for it’s realism – it’s a fantastic, primitive, visceral, wonderful device that spits and fires, drones and warbles, and has a fantastic set of pre-sets, too – including the famous never-ending synth pattern of the Who’s “Baba O’Riley” – and it’s very, very odd to hear that playing on your ipad, from an emulation of the device it was originally created on!   The makers have included the Who session as a preset – amazing!

 

I’ve been playing the iVCS3 recently, and I have recorded a number of tracks, which while not quite ambient, I am happy enough to give them the name “drones” – so, some elements of ambient, then, but, some other, harsher elements too.

 

I believe I recorded about a dozen tracks, a few of which turned out to be somewhat substandard (clearly a beginner with the device, you can’t win them all!) but I believe that about eight tracks have survived and are some cracking representations of what this amazing synthesizer is capable of. I’ve mastered three of the tracks, and I hope to work on the rest this weekend, with a view to get the album posted before Monday – that’s my hope, difficult to say if I really will make that date – I shall try.

 

The pieces recorded are simply remarkable, no thanks to me, my involvement is minimal, but, I did need to be involved, it’s strange, in that when you “play” the iVCS3, you don’t often really use the keys, you more often use the knobs to create variation of a running theme. I was very intent on getting some excellent tracks out of the device, so I very, very carefully and very gingerly turned knobs, until I understood what each one did…and then I felt free enough to really experiment, so I really branched out on the last few numbers, which were all longer-running pieces, one of them extending to over ten minutes.

 

So I have momentarily, turned away from working with komplete, but that’ not to say I have stopped, in any way – it’s my intent to work with komplete as much as my schedule with allow me – and my first goal, is to take a complete bass and drum track, that I did a lot of work on, and see if I can create a proggy version of it, complete with precision prog guitaring – that is my goal for this piece. So komplete is waiting for me, and as soon as I get back to it, you can expect a slow but constant stream of music, of many, many kinds and styles, to be built with the remarkable toolset available within komplete 9 ultimate – an awe-inspiring piece of music software that if you had told me about it 20 years ago, I would not have believed you, I would have said it was impossible for such a thing to exist, on a computer…

 

But – exist it does – and we really wanted to step up a bit, and have the capacity and ability to create a much, much broader range of sounds than we previously had available – and the nine synths and the many, many sampled instruments within Komplete, gives us just that! And – the future – there are many amazing instruments available that will run in Kontakt, so we do plan to pick up some of them over time – the first acquisition will be a very special tool, meant to bolster the ambient sampling capability of the studio – soniccouture’s remarkable “geosonics” instrument.

 

This remarkable third-party instrument, which runs in kontakt without issue, manufactured by soniccouture, is comprised of four different musical “sections”, each one representing a season, and many of the sounds have been sampled from nature, all over the world, and compiled into this unique instrument – and some of the “combinations” of sounds they have created are truly remarkable. So I have “geosonics” on my wish list…and I also have a large number of other third party instruments that I would love to add to my sample player set up 🙂

 

In any case, I cannot recommend native instruments highly enough; who have patiently worked on kontakt, reaktor, and all the instruments that plug into them; and Guitar Rig, one of the most amazing software guitar processing packages I have ever seen –and their choice of subcontractors, i.e. companies that have created unique and very special instruments, which native instruments have added to their product offering to make it more attractive. That includes but is not necessarily limited to Soniccouture (whose “gamelan” instrument is included in komplete 9 ultimate – one of my favourite instruments so far – have a listen to my gamelan-created track “bird of paradise”), Scarbee, who make the amazing “rickenbacker bass” instrument (and several other bass and guitar emulations, too!) – which you can hear on “run into town – run 1” or “run into town – run 2”– that thing is just so amazing sounding, completely authentic, and when you couple it with a high quality sampled drum track, it sounds completely real – because of course, it IS completely real.

 

That…is the beauty of sampled instruments. They are real ! Therefore…they SOUND real.   Which is a good thing 🙂